OwnPod
About the OwnPod PCB
OwnPod is an open source PCB design by lori28167, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 65 × 56.5 mm, with 39 components from 28 distinct parts.
Other key parts include the PCM5102A, TP4056 and MT3608. By type, the board carries 14 capacitors, 8 resistors, 5 connectors, 5 switches, 3 ICs and 3 diodes.
It belongs with the audio, dev boards & breakouts and power & battery designs in this gallery.
From the project
ownPod — open-source DIY portable music player with Spotify Connect. RPi Zero 2W, PCM5102A DAC, LVGL classic iPod UI, custom PCB + 3D-printed case.
An open-source, DIY portable music player inspired by the classic iPod. Built on a Raspberry Pi Zero 2W with a custom HAT PCB, featuring local MP3/FLAC playback and Spotify Connect streaming.
- Classic iPod UI — scrolling menus, now playing screen, and cover flow rendered with LVGL on a 2" IPS display - Spotify Connect — appears as a Spotify speaker on your network via librespot - Local playback — MP3, FLAC, WAV, OGG, M4A, AAC from the SD card - Click wheel feel — rotary encoder with acceleration + tactile navigation buttons - Portable — LiPo battery with USB-C charging - HiFi audio —…
Main components on the OwnPod
OwnPod bill of materials (BOM)
39 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | TP4056 | SOP-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MT3608 | SOT-23-6 | U3 |
| 1 | RPi_GPIO_Header | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | 3.5mm_Jack | AudioJack_3.5mm_CUI_SJ-3523-SMT | J2 |
| 1 | USB-C | USB_C_Receptacle_GCT_USB4125 | J3 |
| 1 | LiPo_JST | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
| 1 | ST7789_Display | PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | PWR_SW | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Encoder | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 1 | MENU | SW_SPST_TL3342 | SW3 |
| 1 | BACK | SW_SPST_TL3342 | SW4 |
| 1 | PLAY | SW_SPST_TL3342 | SW5 |
| 1 | RED | LED_0402_1005Metric | D1 |
| 1 | GREEN | LED_0402_1005Metric | D2 |
| 1 | SS14 | D_SMA | D3 |
| 1 | 4.7uH | L_Taiyo-Yuden_NR-30xx | L1 |
| 7 | 100nF | C_0402_1005Metric | C1, C2, C10, C11, C12, C13, C14 |
| 1 | 10uF | C_0805_2012Metric | C3 |
| 3 | 2.2uF | C_0402_1005Metric | C4, C6, C7 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1uF | C_0402_1005Metric | C5 |
| 2 | 22uF | C_0805_2012Metric | C8, C9 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 2k | R_0402_1005Metric | R3 |
| 2 | 1k | R_0402_1005Metric | R4, R5 |
| 1 | 10k | R_0402_1005Metric | R6 |
| 1 | 150k | R_0402_1005Metric | R7 |
| 1 | 20k | R_0402_1005Metric | R8 |
OwnPod design files
The KiCad project lives in the lori28167/ownPod repository on GitHub; these links point at the commit this page was built from.
OwnPod: common questions
How big is the OwnPod PCB?
The OwnPod measures 65 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the OwnPod?
39 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the OwnPod design files?
From the lori28167/ownPod repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the OwnPod design in my own project?
Yes, under the terms of its GPL-2.0 license, which lori28167 chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k