HardLabs

DASHBOARD

luftaquila·a-fa-schematics·2021-2022/PCB/LAST_DASHBOARD/DASHBOARD.kicad_pcb

DASHBOARD PCB layout, top view — open source ESP8266 board by luftaquila
Simulate this board

About the DASHBOARD PCB

DASHBOARD is an open source ESP8266 PCB design by luftaquila, published on GitHub. It is a 2-layer board measuring 225.1 × 97 mm, with 56 components from 30 distinct parts.

Its main chip is the ESP-01, from the ESP8266 family. Other key parts include the STM32F407VETx, CAN_TRANSCEIVER, 5V DC-DC Converter, 3.3V DC-DC Converter and LOGIC_LEVEL_CONVERTER. By type, the board carries 17 resistors, 9 ICs, 9 transistors, 8 switches, 7 connectors and 4 diodes.

From the project

E-Formula 전기시스템 회로도 및 PCB 설계도, 배선도

회로도 EV.kicadpro KiCAD 6.0 프로젝트 메인 회로도입니다. 추상적으로 차량의 모든 고전압/저전압 전기 계통이 표현되어 있습니다. 메인 회로도 하위의 계층 회로도는 개별 구성 요소를 추상화합니다. 계층 회로도 중 /PCB` 폴더 하위의 파일들은 실제 PCB의 회로도입니다.

PCB /PCB/\.kicadpcb KiCAD 6.0 PCB 아트워크 각 PCB 폴더는 하나의 독립적인 KiCAD 프로젝트입니다. 메인 회로도인 EV.kicadsch 파일이 계층 회로 구성을 통해 각 PCB 폴더의 .kicadsch 파일을 가리키는 방식으로 서로 연결되어 있습니다.

배선 wirings * 차량의 모든 외부 배선을 표현하는 WireViz 배선 체계도입니다.

DASHBOARD, from the project README
From the project README

Main components on the DASHBOARD

STM32F407VETxESP-01CAN_TRANSCEIVER5V DC-DC Converter3.3V DC-DC ConverterLOGIC_LEVEL_CONVERTERDFR0299NEO-7MD302

DASHBOARD bill of materials (BOM)

56 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F407VETx
U1
1
ESP-01
U2
1
CAN_TRANSCEIVER
U3
1
5V DC-DC Converter
U4
1
3.3V DC-DC Converter
U5
1
LOGIC_LEVEL_CONVERTER
U6
1
DFR0299
U7
1
NEO-7M
U8
1
D302
U9
9
2N3904
Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +1
1
DEBUG
J1
1
SPK
J2
1
PM100DX
J3
1
USART1
J4
1
SHUTDOWN
J5
1
CAN
J6
1
DASHBOARD
J7
1
Antenna
AE1
1
HR702NH-DC12V
K1
1
ESP_RST
SW1
Show 10 more
QtyPartRefs
1
ESP_PROGRAM
SW2
1
PROGRAM
SW3
5
SW_DPST
SW4, SW5, SW6, SW7, SW8
1
IMD_LED
D1
1
BMS_LED
D2
1
BSPD_LED
D3
1
HV_ACTIVE_LED
D4
15
1k
R1, R2, R4, R5, R6, R8, R9, R10 +7
1
330
R3
1
10k
R7

DASHBOARD design files

The KiCad project lives in the luftaquila/a-fa-schematics repository on GitHub; these links point at the commit this page was built from.

DASHBOARD: common questions

What microcontroller does the DASHBOARD use?

The DASHBOARD is built around the ESP-01, from the ESP8266 family.

How big is the DASHBOARD PCB?

The DASHBOARD measures 225.1 × 97 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DASHBOARD?

56 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DASHBOARD design files?

From the luftaquila/a-fa-schematics repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DASHBOARD design in my own project?

The repository has no license, so all rights stay with luftaquila. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DASHBOARD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in a-fa-schematics

Similar boards