Car-Neopixel-Board
M0HID·Car-Neopixel-Board·PCB/wledcar.kicad_pcb
About the Car-Neopixel-Board
Car-Neopixel-Board is an open source ESP32 PCB design by M0HID, published on GitHub. It is a 2-layer board measuring 41.7 × 50 mm, with 33 components from 21 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the SN74AHCT125N, XL4015 and AMS1117-3.3. By type, the board carries 11 resistors, 10 capacitors, 4 ICs, 4 connectors, 3 diodes and 1 inductor.
It belongs with the displays & leds designs in this gallery.
From the project
A WLED controller for automotive use, in a small, compact form factor!
A WLED controller for automotive use, in a small, compact form factor!
(Check out WLED here!) ## ⚙️ Features: - 5V
Main components on the Car-Neopixel-Board
Car-Neopixel-Board bill of materials (BOM)
33 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74AHCT125N | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | XL4015 | TO-263-5_TabPin3 | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | Conn_01x04 | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Phoenix_MKDS-3-8-5.08_1x08_P5.08mm_Horizontal | J8 |
| 3 | SS54 MDD(Microdiode Electronics) | D_SMA | D1, D2, D3 |
| 1 | L | L_APV_APH1265 | L1 |
| 3 | 100nF | C_0603_1608Metric | C1, C4, C7 |
| 2 | 22uF | C_0603_1608Metric | C2, C3 |
| 1 | 220uF | C_0603_1608Metric | C8 |
| 1 | 330uF | C_0603_1608Metric | C9 |
| 3 | 1uF | C_0603_1608Metric | C10, C11, C12 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 10k | R_0603_1608Metric | R3 |
| 2 | 22 | R_0603_1608Metric | R4, R5 |
| 4 | 62 | R_0603_1608Metric | R6, R7, R8, R9 |
| 1 | 1k | R_0603_1608Metric | R10 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3.3k | R_0603_1608Metric | R11 |
Car-Neopixel-Board design files
The KiCad project lives in the M0HID/Car-Neopixel-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/wledcar.kicad_pcb
- SchematicPCB/wledcar.kicad_sch
- BOMBOM.csv
Car-Neopixel-Board: common questions
What microcontroller does the Car-Neopixel-Board use?
The Car-Neopixel-Board is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Car-Neopixel-Board?
The Car-Neopixel-Board measures 41.7 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Car-Neopixel-Board?
33 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Car-Neopixel-Board design files?
From the M0HID/Car-Neopixel-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Car-Neopixel-Board design in my own project?
The repository has no license, so all rights stay with M0HID. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Car-Neopixel-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k