HabitatControl hardware

machadoleonardo94·HabitatControl-hardware·Habitat_V5/Habitat_V5.kicad_pcb

HabitatControl hardware PCB layout, top view — open source ESP32 board by machadoleonardo94

About the HabitatControl hardware PCB

HabitatControl hardware is an open source ESP32 PCB design by machadoleonardo94, published on GitHub. It is a 2-layer board measuring 100.6 × 131 mm, with 155 components from 43 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the XL1509-5V, AP2112K-3.3, PC817, C2988027 and ADS1115IDGS. By type, the board carries 44 resistors, 25 capacitors, 20 diodes, 17 transistors, 11 ICs and 8 inductors.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Hardware files for HabitatControl, designed on DipTrace

Main components on the HabitatControl hardware

HabitatControl hardware bill of materials (BOM)

155 components, 43 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XL1509-5V
U1
1
AP2112K-3.3
U2
1
PC817
U3
6
C2988027
~
XLSEMI(芯龙)
U4, U5, U7, U8, U9, U10
1
ESP32-S3-WROOM-1
U6
1
ADS1115IDGS
U11
1
C154901
PMOS
Q1
15
2N7002K
Q2, Q4, Q5, Q6, Q7, Q8, Q9, Q10 +7
1
40N02
Q3
3
CONN_01X04_SOCKET
Conn_01x04_Socket
J1, J3, J4
2
CONN_01X03_SOCKET
Conn_01x03_Socket
J2, J5
3
100N
100n
CD1, CD3, CD6
5
10U
10u
CD2, CD4, CD5, CD7, CD8
1
C22446878
Polyfuse
F1
1
Relay_SPDT
K1
3
CONN_01X04_SOCKET
Conn_01x04_Socket
OLED1, OLED2, SERIAL1
1
Conn_01x03_Pin
Opto1
2
SW_Push
PROG1, RST1
3
CONN_01X02_PIN
Conn_01x02_Pin
PWM1, TH1, VDC2
1
CONN_01X04_SOCKET
Conn_01x04_Socket
RTC1
Show 23 more
QtyPartRefs
1
Conn_01x03_Socket
Relay1
2
CONN_01X02_PIN
Conn_01x02_Pin
S1, S2
1
CONN_01X04_SOCKET
Conn_01x04_Socket
SHT40
1
C720557
Barrel_Jack_Switch
VDC1
1
WS2812B
D1
1
C181075
D_Zener
D2
8
SS14
D3, D8, D9, D10, D12, D13, D14, D16
3
LED
D4, D6, D11
3
1N4148W
D5, D7, D15
4
BAT54S
D17, D18, D19, D20
7
33U
33u
L1, L3, L4, L5, L6, L7, L8
1
22N
22n
L2
20
220UF
220uF
C1, C3, C4, C5, C6, C9, C10, C11 +12
1
10U
10u
C2
3
100N
100n
C7, C8, C26
1
100UF
100uF
C22
23
10K
10k
R1, R8, R10, R12, R13, R20, R25, R26 +15
2
1k
R2, R9
7
2K2
2k2
R3, R4, R5, R6, R7, R21, R23
4
0R22
R11, R14, R16, R19
4
330
R15, R24, R30, R31
2
0R25
R17, R18
2
100K
100k
R22, R28

HabitatControl hardware design files

The KiCad project lives in the machadoleonardo94/HabitatControl-hardware repository on GitHub; these links point at the commit this page was built from.

HabitatControl hardware: common questions

What microcontroller does the HabitatControl hardware use?

The HabitatControl hardware is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the HabitatControl hardware PCB?

The HabitatControl hardware measures 100.6 × 131 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HabitatControl hardware?

155 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HabitatControl hardware design files?

From the machadoleonardo94/HabitatControl-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HabitatControl hardware design in my own project?

The repository has no license, so all rights stay with machadoleonardo94. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HabitatControl hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards