LevelShifter
About the LevelShifter PCB
LevelShifter is an open source PCB design by Manuvr, published on GitHub. It is a 4-layer board measuring 14.9 × 37.7 mm, with 7 components from 4 distinct parts.
Other key parts include the LSF0204x. By type, the board carries 3 ICs and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCAD source files for Manuvr's motion capture glove.
. , . . | \ -+- .| . .|. .. |/|(]| | (][)(||(|[ | ) ._|
Hardware source files for Manuvr's motion capture glove.
Project | Purpose :-----|:------ Digitabulum-r2 | Sensor front-end PCB. (Pending release) r2-Metacarpals | Flex circuit for the metacarpals. (Pending release) r2-Digit | Flex circuit for digits. (Pending release) r2-Backplane | A backplane PCB containing the power-management block and associated support circuits. Compute-WROOM32 | A digitabulum compute PCB based on Espressif's WROOM32 module.
Main components on the LevelShifter
LevelShifter bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LSF0204x | R-PUQFN-N12 | U1, U2, U3 |
| 1 | LV | Pin_Header_Straight_1x14_Pitch2.54mm | J1 |
| 1 | HV | Pin_Header_Straight_1x14_Pitch2.54mm | J2 |
| 2 | 100nF | CapArray_CKCL44 | CARY1, CARY2 |
LevelShifter design files
The KiCad project lives in the Manuvr/Digitabulum-Hardware repository on GitHub; these links point at the commit this page was built from.
LevelShifter: common questions
How big is the LevelShifter PCB?
The LevelShifter measures 14.9 × 37.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LevelShifter?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the LevelShifter design files?
From the Manuvr/Digitabulum-Hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LevelShifter design in my own project?
The repository has no license, so all rights stay with Manuvr. Use it as a reference, and ask the author before reusing the design.
More boards in Digitabulum-Hardware
R2-Backplane
24.8 × 67.1 mm41 parts4LNo license4
PowerPlant-Module
22.5 × 37.7 mm35 parts4LNo license4
R2-Dev-Backplane
77.9 × 67.1 mm33 parts4LNo license4
IRQ-TestHarness
20.9 × 44.7 mm22 parts4LNo license4
ESP32WROOM32 Compute
24.8 × 31.7 mm15 parts4LNo license4
Compute PCB Template
24.8 × 27.2 mm6 parts4LNo license4
Digitabulum Test Harness
24.8 × 33.1 mm4 parts4LNo license4
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979