Digitabulum Test Harness
About the Digitabulum Test Harness PCB
Digitabulum Test Harness is an open source PCB design by Manuvr, published on GitHub. It is a 4-layer board measuring 24.8 × 33.1 mm, with 4 components from 4 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
KiCAD source files for Manuvr's motion capture glove.
This is a breadboard adapter for Digitabulum-r2. All signals are broken out and labeled.
1) To be used as-is as a breadboard adapter and development tool.
2) To be used as a template for a custom Digitabulum backplane.
[](https://oshpark.com/shared_projects/BhORWpqi)
Digitabulum Test Harness bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X10 | DIP-24_W15.24mm_Socket_LongPads | P1 |
| 1 | CONN_02X05 | Pin_Header_Angled_2x05_Pitch2.54mm | P2 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02_Pitch2.54mm | P3 |
| 1 | CONN_02X16 | DF12(3.0)-32DS-0.5V(86) | P7 |
Digitabulum Test Harness design files
The KiCad project lives in the Manuvr/Digitabulum-Hardware repository on GitHub; these links point at the commit this page was built from.
Digitabulum Test Harness: common questions
How big is the Digitabulum Test Harness PCB?
The Digitabulum Test Harness measures 24.8 × 33.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Digitabulum Test Harness?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Digitabulum Test Harness design files?
From the Manuvr/Digitabulum-Hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Digitabulum Test Harness design in my own project?
The repository has no license, so all rights stay with Manuvr. Use it as a reference, and ask the author before reusing the design.
More boards in Digitabulum-Hardware
R2-Backplane
24.8 × 67.1 mm41 parts4LNo license4
PowerPlant-Module
22.5 × 37.7 mm35 parts4LNo license4
R2-Dev-Backplane
77.9 × 67.1 mm33 parts4LNo license4
IRQ-TestHarness
20.9 × 44.7 mm22 parts4LNo license4
ESP32WROOM32 Compute
24.8 × 31.7 mm15 parts4LNo license4
LevelShifter
14.9 × 37.7 mm7 parts4LNo license4
Compute PCB Template
24.8 × 27.2 mm6 parts4LNo license4
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979