Feniks
marijn1606·Feniks·Feniks_V0.5/Feniks_V0.5_pcb/Feniks.kicad_pcb
About the Feniks PCB
Feniks is an open source ESP32 PCB design by marijn1606, published on GitHub. It is a 2-layer board measuring 91 × 22 mm, with 52 components from 30 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the TP4056, DW01, FS8205A, FP6298 and LM1117-3.3. By type, the board carries 20 resistors, 12 capacitors, 6 ICs, 4 diodes, 3 switches and 2 connectors.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
bbq thermometer hobby project
Relatively cheap wifi enabled 4 channel BBQ thermometer based on a ESP32-C3.
The system is powered by an 18650 li-ion battery, and has integrated battery charge and protection circuitry.
The temperature probe data is displayed on a small I2C OLED screen as well as a webserver hosted on the ESP.
Main components on the Feniks
Feniks bill of materials (BOM)
52 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U1 |
| 1 | DW01 | SOT-23-6_Handsoldering | U2 |
| 1 | FS8205A | SOT-23-6_Handsoldering | U3 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U4 |
| 1 | FP6298 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U5 |
| 1 | LM1117-3.3 | SOT-223-3_TabPin2 | U6 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | I2C OLED | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Battery_Cell | 18650SMT holder | BT1 |
| 3 | Thermistor_NTC | PinSocket_1x02_P2.54mm_Vertical | NTC1, NTC2, NTC3 |
| 1 | SW_SPST | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 2 | SW_Push | SW_SPST_CK_RS282G05A3 | SW2, SW3 |
| 1 | green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | red | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | D_Schottky | D_SMA | D3 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4 |
| 1 | 3.3uH | CD43 | L1 |
| 1 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 6 | 47uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5, C6, C7, C8 |
| 5 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C9, C10, C11, C12 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 51K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R14, R15, R16, R21 |
| 3 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R19 |
| 1 | 20K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 15K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R18 |
| 1 | 3k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 26k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 68k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
Feniks design files
The KiCad project lives in the marijn1606/Feniks repository on GitHub; these links point at the commit this page was built from.
Feniks: common questions
What microcontroller does the Feniks use?
The Feniks is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Feniks PCB?
The Feniks measures 91 × 22 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Feniks?
52 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Feniks design files?
From the marijn1606/Feniks repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Feniks design in my own project?
The repository has no license, so all rights stay with marijn1606. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Feniks without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k