HardLabs

Amplifier.kicad pcb-CNC version (with some problems)

MarinosK·Inhibition·hardware/schematics and pcb/amplifier.kicad_pcb-CNC version (with some problems).kicad_pcb

Amplifier.kicad pcb-CNC version (with some problems) layout, top view — open source board by MarinosK
Simulate this board

About the Amplifier.kicad pcb-CNC version (with some problems)

Amplifier.kicad pcb-CNC version (with some problems) is an open source PCB design by MarinosK, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 67 components from 29 distinct parts.

Other key parts include the AD620, LM324, MCP3008 and CA3140. By type, the board carries 29 capacitors, 23 resistors, 9 connectors, 4 ICs, 1 switch and 1 LED.

It belongs with the robotics & motion and audio designs in this gallery.

From the project

www.inhibition-eeg.com

Installation | Workshop (c) 2016 by Marinos Koutsomichalis

Code and hardware designs are distributed under the Attribution-NonCommercial-ShareAlike 3.0 Unported Creative Commons Licence (details here: http://creativecommons.org/licenses/by-nc-sa/3.0/deed.en_US).

Main components on the Amplifier.kicad pcb-CNC version (with some problems)

AD620LM324MCP3008CA3140

Amplifier.kicad pcb-CNC version (with some problems) bill of materials (BOM)

67 components, 29 distinct parts.

QtyPartRefs
1
AD620
U1
1
LM324
U2
1
MCP3008
U3
1
CA3140
U4
1
JACK_2P
J1
1
CONN_01X03
P1
2
CONN_01X07
P2, P3
4
CONN_01X20
P4, P5, P6, P7
1
CONN_01X02
P8
1
Switch_DPST
SW1
1
POT
RV1
2
0.01μ
C1, C2
2
1n
C3, C4
5
0.01μ
C5, C7, C9, C11, C19
5
0.33μ
C6, C8, C10, C12, C20
6
10μ
C13, C14, C18, C22, C28, C29
2
0.47μ
C15, C17
2
0.82μ
C16, C21
2
.01μ
C23, C24
1
1n
C25
Show 9 more
QtyPartRefs
2
1μ
C26, C27
2
100K
R1, R4
2
15M
R2, R3
2
100
R5, R6
11
10K
R7, R8, R9, R10, R11, R14, R15, R16 +3
3
470K
R12, R13, R17
1
220
R18
1
15K
R20
1
1K
R21

Amplifier.kicad pcb-CNC version (with some problems) design files

The KiCad project lives in the MarinosK/Inhibition repository on GitHub; these links point at the commit this page was built from.

Amplifier.kicad pcb-CNC version (with some problems): common questions

How big is the Amplifier.kicad pcb-CNC version (with some problems)?

The Amplifier.kicad pcb-CNC version (with some problems) measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Amplifier.kicad pcb-CNC version (with some problems)?

67 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Amplifier.kicad pcb-CNC version (with some problems) design files?

From the MarinosK/Inhibition repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Amplifier.kicad pcb-CNC version (with some problems) design in my own project?

The repository has no license, so all rights stay with MarinosK. Use it as a reference, and ask the author before reusing the design.

More boards in Inhibition

Similar boards