Thegoose
Marsgate·goosebrain·kicad/thegoose.kicad_pcb
About the Thegoose PCB
Thegoose is an open source Raspberry Pi PCB design by Marsgate, published on GitHub. It is a 6-layer board measuring 68.2 × 32 mm, with 117 components from 51 distinct parts.
Its main chip is the RP2354A, from the Raspberry Pi family. Other key parts include the DRV8251ADDAR, AP64500SP-13, SRV05-4, HT7550-1 and XC6206P332MR-G. By type, the board carries 50 capacitors, 33 resistors, 14 ICs, 6 modules, 5 connectors and 3 diodes.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Duplicate of thegoose
This repo holds two boards that ship as one system:
- The brain (kicad/thegoose.kicadpro): an RP2354A robot controller for six DC motors and six IO ports, with a USB-A host for a 2.4 GHz controller dongle. Its USB-C port is for programming only. - The smart pack (kicad-pack/goosepack.kicadpro): a small board that sits on the Ovonic 3S 450 mAh cells. It carries the charger, the protector, the 15 A fuse and its own USB-C charging port, and it plugs into the brain over an XT30 lead. Packs can be swapped, and spares can be sold. - The 2S smart pack (kicad-pack-2s/goosepack2s.kicadpro`, started…
Main components on the Thegoose
Thegoose bill of materials (BOM)
117 components, 51 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | DRV8251ADDAR DRV8251A Texas Instruments | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1, U2, U3, U15, U16, U17 |
| 1 | AP64500SP-13 Diodes Incorporated | Diodes_SO-8EP | U4 |
| 2 | SRV05-4 hongjiacheng | SOT-23-6 | U6, U11 |
| 1 | HT7550-1 Holtek Semicon | SOT-89-3 | U8 |
| 1 | XC6206P332MR-G XC6206P332MR Torex Semicon | SOT-23-3 | U9 |
| 1 | RP2354A Raspberry Pi | QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U10 |
| 1 | TLV74311PDBVR TLV74311PDBV Texas Instruments | SOT-23-5 | U12 |
| 1 | SN74AHCT1G125DBVR 74AHCT1G125 UMW | SOT-23-5 | U14 |
| 6 | S2B-PH-K-S(LF)(SN) ~ JST | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | M1, M2, M3, M4, M5, M6 |
| 1 | AO4407A UMW | SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | ABM8-272-T3 12MHz Abracon | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C16PIN USB_C_Receptacle_USB2.0_16P SHOU HAN | USB_C_Receptacle_ShouHan_TYPE-C16PIN | J1 |
| 1 | XT30PW-M30.G.Y XT30PW-M Changzhou Amass Elec | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J3 |
| 1 | AF 90 WJDG USB-A host SHOU HAN | USB_A_ShouHan_AF90_WJDG | J4 |
| 1 | 2011-3X06G00RB IO 3x6 RA WingTAT | PinHeader_3x06_P2.54mm_Horizontal_WingTAT | J5 |
| 1 | B3B-PH-K-S(LF)(SN) LED stick JST | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J12 |
| 1 | JK-nSMD050-16 0.5A hold Jinrui Electronic | Fuse_1206_3216Metric | F2 |
| 1 | SK12D07VG4 Power SHOU HAN | SW_SPDT_ShouHan_SK12D07VG4 | SW1 |
| 1 | SKRTLAE010 BOOT ALPS Electric | SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010_JLC | SW2 |
| 2 | B5819W MDD | D_SOD-123 | D2, D3 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SMF14A Littelfuse | D_SMF | D4 |
| 1 | HMS0530-2R2M 2.2uH Zeng Yi | L_ZengYi_HMS0530 | L1 |
| 9 | CL21A106KAYNNNE 10uF Samsung Electro-Mechanics | C_0805_2012Metric | C3, C6, C10, C15, C59, C73, C75, C77 +1 |
| 8 | CC0805KRX7R9BB104 100nF YAGEO | C_0805_2012Metric | C4, C7, C11, C14, C72, C76, C78, C80 |
| 3 | CL31A226KPHNNNE 22uF Samsung Electro-Mechanics | C_1206_3216Metric | C5, C8, C12 |
| 1 | 0402B472K500NT 4.7nF FH (Guangdong Fenghua) | C_0402_1005Metric | C16 |
| 1 | CL10A105KB8NNNC 1uF Samsung Electro-Mechanics | C_0603_1608Metric | C37 |
| 2 | CL10A106KP8NNNC 10uF Samsung Electro-Mechanics | C_0603_1608Metric | C38, C40 |
| 1 | CL05A105KA5NQNC 1uF Samsung Electro-Mechanics | C_0402_1005Metric | C39 |
| 15 | CL05B104KO5NNNC 100nF Samsung Electro-Mechanics | C_0402_1005Metric | C41, C42, C43, C44, C45, C46, C47, C48 +7 |
| 6 | CL05A475MP5NRNC 4.7uF Samsung Electro-Mechanics | C_0402_1005Metric | C50, C51, C52, C85, C86, C87 |
| 2 | 0402CG150J500NT 15pF FH (Guangdong Fenghua) | C_0402_1005Metric | C56, C57 |
| 1 | CL05B103KB5NNNC 10nF Samsung Electro-Mechanics | C_0402_1005Metric | C71 |
| 1 | CL05B104KB54PNC 100nF Samsung Electro-Mechanics | C_0402_1005Metric | C74 |
| 1 | 0402WGF2003TCE 200k UNI-ROYAL | R_0402_1005Metric | R25 |
| 1 | 0402WGF3902TCE 39k UNI-ROYAL | R_0402_1005Metric | R26 |
| 1 | 0402WGF7501TCE 7.5k UNI-ROYAL | R_0402_1005Metric | R27 |
| 3 | 0402WGF1502TCE 15k UNI-ROYAL | R_0402_1005Metric | R28, R109, R114 |
| 1 | 0402WGF4702TCE 47k UNI-ROYAL | R_0402_1005Metric | R40 |
| 1 | 0402WGF4701TCE 4.7k UNI-ROYAL | R_0402_1005Metric | R41 |
| 1 | 0402WGF330JTCE 33 UNI-ROYAL | R_0402_1005Metric | R42 |
| 2 | 0402WGF1001TCE 1k UNI-ROYAL | R_0402_1005Metric | R43, R46 |
| 2 | 0603WAF270JT5E 27 UNI-ROYAL | R_0603_1608Metric | R44, R45 |
| 2 | 0402WGF220JTCE 22 UNI-ROYAL | R_0402_1005Metric | R48, R49 |
| 1 | 0402WGF1003TCE 100k UNI-ROYAL | R_0402_1005Metric | R52 |
| 1 | 0402WGF2702TCE 27k UNI-ROYAL | R_0402_1005Metric | R53 |
| 6 | 0402WGF3300TCE 330 UNI-ROYAL | R_0402_1005Metric | R55, R56, R57, R58, R59, R60 |
| 2 | 0402WGF5101TCE 5.1k UNI-ROYAL | R_0402_1005Metric | R99, R100 |
| 6 | 0402WGF1201TCE 1.2k UNI-ROYAL | R_0402_1005Metric | R101, R102, R103, R104, R105, R106 |
| 1 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R107 |
| 1 | 0402WGF3302TCE 33k UNI-ROYAL | R_0402_1005Metric | R108 |
Thegoose design files
The KiCad project lives in the Marsgate/goosebrain repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/thegoose.kicad_pcb
- Schematickicad/thegoose.kicad_sch
Thegoose: common questions
What microcontroller does the Thegoose use?
The Thegoose is built around the RP2354A, from the Raspberry Pi family.
How big is the Thegoose PCB?
The Thegoose measures 68.2 × 32 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Thegoose?
117 components, from 51 distinct parts. The full bill of materials is listed on this page.
Where can I download the Thegoose design files?
From the Marsgate/goosebrain repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Thegoose design in my own project?
The repository has no license, so all rights stay with Marsgate. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Thegoose without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in goosebrain
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507