C1
maticas-tech-sas·maticas-hardware·pcb/Kraktky-Modificado-Yahiko-V2/C1.kicad_pcb
About the C1 PCB
C1 is an open source ESP32 PCB design by maticas-tech-sas, published on GitHub. It is a 2-layer board measuring 98.5 × 59.3 mm, with 21 components from 6 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the MOC3021M. By type, the board carries 8 connectors, 6 resistors, 4 ICs and 3 transistors.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Hardware branch of Maticas.
Main components on the C1
C1 bill of materials (BOM)
21 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MOC3021M | DIP-6_W7.62mm | U1, U3, U4 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U2 |
| 3 | BT136-500 | TO-220-3_Vertical | Q1, Q2, Q3 |
| 7 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J1, J2, J3, J4, J5, J6, J7 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Altech_AK300-3_P5.00mm | J12 |
| 6 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6 |
C1 design files
The KiCad project lives in the maticas-tech-sas/maticas-hardware repository on GitHub; these links point at the commit this page was built from.
C1: common questions
What microcontroller does the C1 use?
The C1 is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the C1 PCB?
The C1 measures 98.5 × 59.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the C1?
21 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the C1 design files?
From the maticas-tech-sas/maticas-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the C1 design in my own project?
The repository has no license, so all rights stay with maticas-tech-sas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the C1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in maticas-hardware
Control and power extended
maticas-tech-sas
78.1 × 72.5 mm65 parts2LNo license0Intregration1
maticas-tech-sas
102.6 × 126.5 mm36 parts2LNo license0ESP32
Circuit
maticas-tech-sas
144.3 × 102.1 mm31 parts2LNo license0Power control
maticas-tech-sas
78.5 × 79 mm28 parts2LNo license0Esp32
maticas-tech-sas
71.8 × 80.9 mm19 parts2LNo license0Solar battery charge
maticas-tech-sas
70.4 × 43.2 mm13 parts2LNo license0Basic decoration
maticas-tech-sas
67.2 × 56.5 mm12 parts2LNo license0Control and power
maticas-tech-sas
44.8 × 28.7 mm12 parts2LNo license0ESP32
Modulo DEC
maticas-tech-sas
85.4 × 78.9 mm10 parts2LNo license0Ambient measurement
maticas-tech-sas
69.8 × 61.1 mm9 parts2LNo license0Water tank module
maticas-tech-sas
65.7 × 64 mm9 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k