Circuit
maticas-tech-sas·maticas-hardware·pcb/Control-Modificado-Yahiko-V1/Circuit.kicad_pcb
About the Circuit PCB
Circuit is an open source ESP32 PCB design by maticas-tech-sas, published on GitHub. It is a 2-layer board measuring 144.3 × 102.1 mm, with 31 components from 11 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the MOC3021M. By type, the board carries 12 connectors, 9 resistors, 4 ICs, 4 transistors and 1 diode.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Hardware branch of Maticas.
Main components on the Circuit
Circuit bill of materials (BOM)
31 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MOC3021M | DIP-6_W7.62mm | U1, U3, U4 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U2 |
| 3 | BT136-500 | TO-220-3_Vertical | Q1, Q2, Q3 |
| 1 | 2N2219 | TO-39-3 | Q4 |
| 10 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J1, J2, J3, J4, J5, J6, J7, J9 +2 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_Altech_AK300-3_P5.00mm | J8, J12 |
| 1 | JQC-3F-(T73)-1Z-12VDC JQC-3F-_T73_-1Z-12VDC | JQC3FT731Z12VDC | Relay1 |
| 1 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 4 | R | R_Axial_DIN0922_L20.0mm_D9.0mm_P7.62mm_Vertical | R1, R2, R3, R6 |
| 2 | R | R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R4, R5 |
| 3 | R | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R7, R8, R9 |
Circuit design files
The KiCad project lives in the maticas-tech-sas/maticas-hardware repository on GitHub; these links point at the commit this page was built from.
Circuit: common questions
What microcontroller does the Circuit use?
The Circuit is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Circuit PCB?
The Circuit measures 144.3 × 102.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Circuit?
31 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Circuit design files?
From the maticas-tech-sas/maticas-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Circuit design in my own project?
The repository has no license, so all rights stay with maticas-tech-sas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Circuit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in maticas-hardware
Control and power extended
maticas-tech-sas
78.1 × 72.5 mm65 parts2LNo license0Intregration1
maticas-tech-sas
102.6 × 126.5 mm36 parts2LNo license0Power control
maticas-tech-sas
78.5 × 79 mm28 parts2LNo license0ESP32
C1
maticas-tech-sas
98.5 × 59.3 mm21 parts2LNo license0Esp32
maticas-tech-sas
71.8 × 80.9 mm19 parts2LNo license0Solar battery charge
maticas-tech-sas
70.4 × 43.2 mm13 parts2LNo license0Basic decoration
maticas-tech-sas
67.2 × 56.5 mm12 parts2LNo license0Control and power
maticas-tech-sas
44.8 × 28.7 mm12 parts2LNo license0ESP32
Modulo DEC
maticas-tech-sas
85.4 × 78.9 mm10 parts2LNo license0Ambient measurement
maticas-tech-sas
69.8 × 61.1 mm9 parts2LNo license0Water tank module
maticas-tech-sas
65.7 × 64 mm9 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k