Modulo DEC
maticas-tech-sas·maticas-hardware·pcb/Datalogger-Modificado-Yahiko-V1/Modulo_DEC.kicad_pcb
About the Modulo DEC PCB
Modulo DEC is an open source ESP32 PCB design by maticas-tech-sas, published on GitHub. It is a 2-layer board measuring 85.4 × 78.9 mm, with 10 components from 7 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. By type, the board carries 5 connectors, 2 resistors and 1 IC.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Hardware branch of Maticas.
Main components on the Modulo DEC
Modulo DEC bill of materials (BOM)
10 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Altech_AK300-4_P5.00mm | J1 |
| 3 | Screw_Terminal_01x03 | TerminalBlock_Altech_AK300-3_P5.00mm | J2, J3, J4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J5 |
| 1 | ~ | R_Array_SIP6 | RTC1 |
| 1 | R_Network_Dividers_x04_SIP | R_Array_SIP6 | SDModule1 |
| 2 | R | R_Axial_DIN0614_L14.3mm_D5.7mm_P5.08mm_Vertical | R1, R2 |
Modulo DEC design files
The KiCad project lives in the maticas-tech-sas/maticas-hardware repository on GitHub; these links point at the commit this page was built from.
Modulo DEC: common questions
What microcontroller does the Modulo DEC use?
The Modulo DEC is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How big is the Modulo DEC PCB?
The Modulo DEC measures 85.4 × 78.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modulo DEC?
10 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modulo DEC design files?
From the maticas-tech-sas/maticas-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Modulo DEC design in my own project?
The repository has no license, so all rights stay with maticas-tech-sas. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Modulo DEC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in maticas-hardware
Control and power extended
maticas-tech-sas
78.1 × 72.5 mm65 parts2LNo license0Intregration1
maticas-tech-sas
102.6 × 126.5 mm36 parts2LNo license0ESP32
Circuit
maticas-tech-sas
144.3 × 102.1 mm31 parts2LNo license0Power control
maticas-tech-sas
78.5 × 79 mm28 parts2LNo license0ESP32
C1
maticas-tech-sas
98.5 × 59.3 mm21 parts2LNo license0Esp32
maticas-tech-sas
71.8 × 80.9 mm19 parts2LNo license0Solar battery charge
maticas-tech-sas
70.4 × 43.2 mm13 parts2LNo license0Basic decoration
maticas-tech-sas
67.2 × 56.5 mm12 parts2LNo license0Control and power
maticas-tech-sas
44.8 × 28.7 mm12 parts2LNo license0Ambient measurement
maticas-tech-sas
69.8 × 61.1 mm9 parts2LNo license0Water tank module
maticas-tech-sas
65.7 × 64 mm9 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k