Control and power extended
maticas-tech-sas·maticas-hardware·pcb/legacy/control_and_power/control_and_power/control_and_power_extended/control_and_power_extended.kicad_pcb
About the Control and power extended PCB
Control and power extended is an open source PCB design by maticas-tech-sas, published on GitHub. It is a 2-layer board measuring 78.1 × 72.5 mm, with 65 components from 10 distinct parts.
Other key parts include the 40106. By type, the board carries 24 resistors, 15 connectors, 6 transistors, 6 diodes and 1 IC.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Hardware branch of Maticas.
Main components on the Control and power extended
Control and power extended bill of materials (BOM)
65 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 40106 | DIP-14_W7.62mm | U3 |
| 6 | TIP122 | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6 |
| 3 | Conn_01x07_Male | PinHeader_1x07_P2.54mm_Vertical | J1, J8, J9 |
| 12 | Conn_01x01_Male | PinHeader_1x01_P2.54mm_Vertical | J2, J3, J4, J5, J6, J7, J10, J11 +4 |
| 7 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | 5V1, OUT1, OUT2, OUT3, OUT4, OUT5, OUT6 |
| 6 | 4N25 | DIP-6_W7.62mm | Opto1, Opto2, Opto3, Opto4, Opto5, Opto6 |
| 6 | LED | LED_D3.0mm_Clear | D1, D2, D3, D4, D5, D6 |
| 12 | 220 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R7, R8, R9, R10, R11, R12 +4 |
| 6 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R3, R4, R13, R14, R15, R16 |
| 6 | 10 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R5, R6, R17, R18, R19, R20 |
Control and power extended design files
The KiCad project lives in the maticas-tech-sas/maticas-hardware repository on GitHub; these links point at the commit this page was built from.
Control and power extended: common questions
How big is the Control and power extended PCB?
The Control and power extended measures 78.1 × 72.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Control and power extended?
65 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Control and power extended design files?
From the maticas-tech-sas/maticas-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Control and power extended design in my own project?
The repository has no license, so all rights stay with maticas-tech-sas. Use it as a reference, and ask the author before reusing the design.
More boards in maticas-hardware
Intregration1
maticas-tech-sas
102.6 × 126.5 mm36 parts2LNo license0ESP32
Circuit
maticas-tech-sas
144.3 × 102.1 mm31 parts2LNo license0Power control
maticas-tech-sas
78.5 × 79 mm28 parts2LNo license0ESP32
C1
maticas-tech-sas
98.5 × 59.3 mm21 parts2LNo license0Esp32
maticas-tech-sas
71.8 × 80.9 mm19 parts2LNo license0Solar battery charge
maticas-tech-sas
70.4 × 43.2 mm13 parts2LNo license0Basic decoration
maticas-tech-sas
67.2 × 56.5 mm12 parts2LNo license0Control and power
maticas-tech-sas
44.8 × 28.7 mm12 parts2LNo license0ESP32
Modulo DEC
maticas-tech-sas
85.4 × 78.9 mm10 parts2LNo license0Ambient measurement
maticas-tech-sas
69.8 × 61.1 mm9 parts2LNo license0Water tank module
maticas-tech-sas
65.7 × 64 mm9 parts2LNo license0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k