3 open source boards using the 757

Real designs built with the 757, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The 757 in open source designs

The gallery holds 3 open source boards using the 757 from 2 GitHub repositories; a typical one measures about 179 × 111 mm and carries around 50 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is RetroCom by SamyIOoOI.

Microcontrollers on boards using the 757

What boards using the 757 are built for

757: common questions

Where can I find a 757 reference design?

Each of the 3 boards on this page is a real design using the 757. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 757 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 757?

The median is 179 × 111 mm, and 33% are two-layer designs.

What is the most popular open source board using the 757?

By GitHub stars, RetroCom by SamyIOoOI, with 0 stars.

Can I simulate one of these boards using the 757 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part