9 open source boards using the ARDUINO_MICRO

Real designs built with the ARDUINO_MICRO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the ARDUINO_MICRO

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ARDUINO_MICRO connects to, and the resistors, capacitors and other passives placed on it.

  • The D17 pin is left unconnected on 4 of 5 designs.
  • The RESET pins is left unconnected on 67% of them (a signal on 3).
  • The D1/TX pin is left unconnected on 3 of 5 designs (a signal on 2).
  • The ~D5 pin is left unconnected on 3 of 5 designs (a signal on 2).
D17pin 2Connected to: Not connected 80% · a signal 20%
D1/TXpin 3Connected to: Not connected 60% · a signal 40%
RESETpin 5, 30Connected to: Not connected 67% · a signal 33%
~D5pin 10Connected to: Not connected 60% · a signal 40%
D7pin 12Connected to: Signal 60% · not connected 20% · 5V 20%
  • Series resistor on 40% · 470 Ω (1)
~D13pin 18Connected to: Not connected 75% · a signal 25%
3V3pin 19Connected to: Not connected 75% · a signal 25%
AREFpin 20Connected to: Not connected 75% · a signal 25%
A1/D19pin 22Connected to: Not connected 75% · a signal 25%
A3/D21pin 24Connected to: Not connected 50% · a signal 50%
  • Series resistor on 50% · 10 kΩ (1), 180 kΩ (1)
A4/D22pin 25Connected to: Not connected 50% · a signal 50%
  • Series resistor on 50% · 560 kΩ (1)
A5/D23pin 26Connected to: Not connected 50% · a signal 50%
  • Series resistor on 50% · 39 kΩ (1)
NCpin 27, 28Connected to: Not connected 63% · a signal 25%
VINpin 32Connected to: Not connected 67% · a signal 33%
D14pin 33Connected to: Not connected 67% · a signal 33%

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenLaserScanningMicroscope by GaudiLabs, CozScan2020 by cozdas, Keyboard by qwelyt and Kicad test by maxsterl666.

The ARDUINO_MICRO in open source designs

The gallery holds 9 open source boards using the ARDUINO_MICRO from 6 GitHub repositories; a typical one measures about 147.3 × 88.9 mm and carries around 50 components.

56% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is OpenLaserScanningMicroscope by GaudiLabs.

Microcontrollers on boards using the ARDUINO_MICRO

What boards using the ARDUINO_MICRO are built for

ARDUINO_MICRO: common questions

Where can I find a ARDUINO_MICRO reference design?

Each of the 9 boards on this page is a real design using the ARDUINO_MICRO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ARDUINO_MICRO D17 pin connected?

The D17 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ARDUINO_MICRO.

How is the ARDUINO_MICRO RESET pin connected?

The RESET pins is left unconnected on 67% of them (a signal on 3). Counted from the KiCad layouts of 5 open source designs using the ARDUINO_MICRO.

How is the ARDUINO_MICRO D1/TX pin connected?

The D1/TX pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the ARDUINO_MICRO.

Which microcontrollers do boards using the ARDUINO_MICRO use?

Most are built on AVR/Arduino (9).

How big is a typical board using the ARDUINO_MICRO?

The median is 147.3 × 88.9 mm, and 56% are two-layer designs.

What is the most popular open source board using the ARDUINO_MICRO?

By GitHub stars, OpenLaserScanningMicroscope by GaudiLabs, with 342 stars.

Can I simulate one of these boards using the ARDUINO_MICRO before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part