ESP32S3-WROOM-1-Dev-Board
meerzafarnoohani·ESP32S3-WROOM-1-Dev-Board
About the ESP32S3-WROOM-1-Dev-Board
ESP32S3-WROOM-1-Dev-Board is an open source ESP32 PCB design by meerzafarnoohani, published on GitHub under the MIT license. It is a 2-layer board measuring 40.5 × 76.4 mm, with 43 components from 27 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the CP2104, USBLC6-2P6 and AP7361C. By type, the board carries 15 resistors, 10 capacitors, 5 ICs, 4 diodes, 3 connectors and 2 switches.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
ESP32-S3-N16R8 Custom Dev Board
A compact, high-performance development board powered by the ESP32-S3-WROOM-1-N16R8 module, designed in KiCad 9.0. This design focuses on maximizing I/O accessibility and providing dual USB-C functionality for both debugging and native USB applications.
Main components on the ESP32S3-WROOM-1-Dev-Board
ESP32S3-WROOM-1-Dev-Board bill of materials (BOM)
43 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1U-N16R8 | ESP32S3WROOM1UN16R8 | IC1 |
| 1 | CP2104 | CP2104_QFN50P400X400X80-25N | U1 |
| 2 | USBLC6-2P6 | SOT-666 | U2, U3 |
| 1 | AP7361C | SOT-89-5 | U4 |
| 1 | UMH3N | SOT-363_SC-70-6 | Q1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 5V INPUT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 2 | Conn_01x16 | PinHeader_1x16_P2.54mm_Vertical | J4, J5 |
| 2 | USB_C_Receptacle_USB2.0 | USB_C | E1, E2 |
| 2 | SW_Push | SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 1 | SS34 | D_SMA | D1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 1 | ESD5Z3.3T1G | D_SOD-523 | D9 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D21 |
| 4 | CL05B104KB54PNC 100nF,50V,X7R | C_0402_1005Metric | C1, C3, C8, C16 |
| 1 | CL05A105KA5NQNC 1uF | C_0402_1005Metric | C2 |
| 1 | CL05B104KB54PNC 10u | C_0402_1005Metric | C4 |
| 1 | CL05B104KB54PNC 10uF,10V | C_0402_1005Metric | C9 |
| 2 | 10u | C_0402_1005Metric | C12, C13 |
| 1 | CL21A226MAQNNNE 0805,22uF,25V,X5R | C_0805_2012Metric | C17 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0 | C_0402_1005Metric | R1, R2 |
| 2 | 22 | C_0402_1005Metric | R3, R4 |
| 4 | 0402WGF5101TCE 0402,5.1k | R_0402_1005Metric | R5, R6, R16, R17 |
| 1 | 0402WGF1002TCE 0402,1k | R_0402_1005Metric | R7 |
| 3 | 0402WGF1002TCE 0402,10k | R_0402_1005Metric | R11, R12, R18 |
| 2 | 0402WGF220JTCE 0402,22 | R_0402_1005Metric | R13, R14 |
| 1 | 10k | R_0402_1005Metric | R41 |
ESP32S3-WROOM-1-Dev-Board design files
The KiCad project lives in the meerzafarnoohani/ESP32S3-WROOM-1-Dev-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutESP32S3 Dev Board.kicad_pcb
- SchematicESP32S3 Dev Board.kicad_sch
ESP32S3-WROOM-1-Dev-Board: common questions
What microcontroller does the ESP32S3-WROOM-1-Dev-Board use?
The ESP32S3-WROOM-1-Dev-Board is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the ESP32S3-WROOM-1-Dev-Board?
The ESP32S3-WROOM-1-Dev-Board measures 40.5 × 76.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32S3-WROOM-1-Dev-Board?
43 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32S3-WROOM-1-Dev-Board design files?
From the meerzafarnoohani/ESP32S3-WROOM-1-Dev-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32S3-WROOM-1-Dev-Board design in my own project?
Yes, under the terms of its MIT license, which meerzafarnoohani chose for the repository.
Can I test firmware for the ESP32S3-WROOM-1-Dev-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k