Mico
Mentra-Community·OpenSourceSmartGlasses·electronics_and_firmware/OSSG_v0p1_and_v0p2/pcb/ver0.1/mico.kicad_pcb
About the Mico PCB
Mico is an open source RP2040/RP2350 PCB design by Mentra-Community, published on GitHub under the MIT license. It is a 2-layer board measuring 30.5 × 138 mm, with 61 components from 18 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1702, MP23DB01HPTR and W25Q128JV. By type, the board carries 25 capacitors, 14 resistors, 11 test points, 7 ICs, 2 connectors and 1 crystal.
It belongs with the wearables and sensors designs in this gallery.
From the project
Open Source smart glasses designed to be 1. All day wearable 2. Immediately useful 3. Extendable for makers, startups, and everyone else.
Main components on the Mico
Mico bill of materials (BOM)
61 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1702 | SOT-23 | U1 |
| 4 | MP23DB01HPTR | MIC_SPH0641LU4H-1 | U2, U5, U6, U7 |
| 1 | W25Q128JV | PSON50P300X200X60-9N | U3 |
| 1 | RP2040 | QFN40P700X700X90-57N | U4 |
| 1 | H130B-12.000-20-3050-EXT H130B-12.000-20-3050-EXT-TR | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | USB_A | USB-A | J1 |
| 1 | SWD Prog | SMD_1x04_P1.27mm | J2 |
| 1 | TESTPOINT_2POLE TestPoint_2Pole | SMD_1x02_P1.27mm | TP1 |
| 10 | TestPoint | SMD_1x01_P1.27mm | TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 +2 |
| 1 | APA3010SECK | LED_0402_1005Metric | D1 |
| 3 | 10UF 10uF | C_0402_1005Metric | C1, C5, C17 |
| 14 | 0.1UF 0.1uF | C_0402_1005Metric | C2, C4, C6, C7, C10, C11, C12, C13 +6 |
| 6 | 1UF 1uF | C_0402_1005Metric | C3, C8, C9, C21, C23, C25 |
| 2 | 27PF 27pF | C_0402_1005Metric | C18, C19 |
| 9 | 10K | R_0402_1005Metric | R1, R3, R8, R9, R10, R11, R12, R13 +1 |
| 2 | 1K | R_0402_1005Metric | R2, R7 |
| 2 | 27R | R_0402_1005Metric | R4, R5 |
| 1 | 470R | R_0402_1005Metric | R6 |
Mico design files
The KiCad project lives in the Mentra-Community/OpenSourceSmartGlasses repository on GitHub; these links point at the commit this page was built from.
Mico: common questions
What microcontroller does the Mico use?
The Mico is built around the RP2040, from the RP2040/RP2350 family.
How big is the Mico PCB?
The Mico measures 30.5 × 138 mm, has 2 copper layers and is 2 mm thick.
How many components are on the Mico?
61 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mico design files?
From the Mentra-Community/OpenSourceSmartGlasses repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Mico design in my own project?
Yes, under the terms of its MIT license, which Mentra-Community chose for the repository.
Can I test firmware for the Mico without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in OpenSourceSmartGlasses
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k