Msa
Mentra-Community·OpenSourceSmartGlasses·electronics_and_firmware/OSSG_v0p1_and_v0p2/pcb/ver0.2/main_rigid_board_kicad_project/msa.kicad_pcb
About the Msa PCB
Msa is an open source RP2040/RP2350 PCB design by Mentra-Community, published on GitHub under the MIT license. It is a 2-layer board measuring 47.8 × 9.4 mm, with 53 components from 32 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1702, MP23DB01HPTR and W25Q128JV. By type, the board carries 20 capacitors, 10 resistors, 7 test points, 5 ICs, 3 diodes and 2 connectors.
It belongs with the wearables and sensors designs in this gallery.
From the project
Open Source smart glasses designed to be 1. All day wearable 2. Immediately useful 3. Extendable for makers, startups, and everyone else.
Main components on the Msa
Msa bill of materials (BOM)
53 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1702 | SOT-23 | U1 |
| 1 | MP23DB01HPTR MCP73831-2-OT | SOT-23-5 | U2 |
| 1 | W25Q128JV | PSON50P300X200X60-9N | U3 |
| 1 | RP2040 | QFN40P700X700X90-57N | U4 |
| 1 | MP23DB01HPTR DMP21D0UT-7 | SOT-523 | U5 |
| 1 | H130B-12.000-20-3050-EXT H130B-12.000-20-3050-EXT-TR | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | USB_B_Micro | micro_usb_right_angle_1050170001_molex | J1 |
| 1 | SWD Prog | SMD_1x04_P1.27mm | J2 |
| 1 | Battery_Cell | BatterySolderOn | BT1 |
| 1 | slim_stack_receptable_12pos_5035481222_schematic | slim_stack_molex_RECEPTACLE_5035481222 | CONN1 |
| 2 | MountingHole | Mount_hole_small_0.7mm | H1, H2 |
| 1 | SW_SPST | SW_SPST_B3U-3100P-B | SW1 |
| 1 | TESTPOINT_2POLE TestPoint_2Pole | SMD_1x02_P1.27mm | TP1 |
| 6 | TestPoint | SMD_1x01_P1.27mm | TP2, TP3, TP4, TP5, TP6, TP9 |
| 1 | APA3010SECK | LED_0402_1005Metric | D1 |
| 1 | LED | LED_0402_1005Metric | D2 |
| 1 | PMEG2010AEJ | D_SOD-323F | D3 |
| 3 | 10UF 10uF | C_0402_1005Metric | C1, C5, C17 |
| 1 | 0.1UF 4.7uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 1UF 4.7uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 0.1UF 0.1uF | C_0402_1005Metric | C4, C6, C7, C10, C11, C12, C13, C14 +2 |
| 2 | 1UF 1uF | C_0402_1005Metric | C8, C9 |
| 2 | 27PF 27pF | C_0402_1005Metric | C18, C19 |
| 1 | 0.1UF 1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20 |
| 1 | 10K 470 | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | R1 |
| 2 | 1K | R_0402_1005Metric | R2, R7 |
| 1 | 10K | R_0402_1005Metric | R3 |
| 2 | 27R | R_0402_1005Metric | R4, R5 |
| 1 | 470R | R_0402_1005Metric | R6 |
| 1 | 10K 10k | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | R8 |
| 1 | 10K 100k | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | R9 |
| 1 | 10K NC | R_0402_1005Metric | R10 |
Msa design files
The KiCad project lives in the Mentra-Community/OpenSourceSmartGlasses repository on GitHub; these links point at the commit this page was built from.
- Layoutelectronics_and_firmware/OSSG_v0p1_and_v0p2/pcb/ver0.2/main_rigid_board_kicad_project/msa.kicad_pcb
- Schematicelectronics_and_firmware/OSSG_v0p1_and_v0p2/pcb/ver0.2/main_rigid_board_kicad_project/msa.kicad_sch
- BOMelectronics_and_firmware/OSSG_v0p1_and_v0p2/pcb/ver0.2/main_rigid_board_kicad_project/bom/MSA_bom.csv
Msa: common questions
What microcontroller does the Msa use?
The Msa is built around the RP2040, from the RP2040/RP2350 family.
How big is the Msa PCB?
The Msa measures 47.8 × 9.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Msa?
53 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Msa design files?
From the Mentra-Community/OpenSourceSmartGlasses repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Msa design in my own project?
Yes, under the terms of its MIT license, which Mentra-Community chose for the repository.
Can I test firmware for the Msa without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in OpenSourceSmartGlasses
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k