Magic-Tabmount
mgiesen·Magic-Tabmount·PCB/KiCad Main/1.2.0.kicad_pcb
About the Magic-Tabmount PCB
Magic-Tabmount is an open source ESP32 PCB design by mgiesen, published on GitHub. It is a 2-layer board measuring 155.5 × 122 mm, with 47 components from 26 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3, HLK-LD2410, DRV8834PWPR, MCP4725xxx-xCH and SN74LV1T34DBV. By type, the board carries 17 resistors, 15 capacitors, 8 ICs, 4 diodes and 1 transistor.
It belongs with the robotics & motion, iot & wireless and displays & leds designs in this gallery.
From the project
Der "Magic Tabmount" ist eine smarte Wandhalterung für das iPad (Generation 5 bis 9). Durch ein integriertes Magnetsystem kann das iPad mit einem Handgriff an der Wand befestigt oder wieder entfernt werden.
Der "Magic Tabmount" ist eine smarte Wandhalterung für das iPad (Generation 5 bis 9). Durch ein integriertes Magnetsystem kann das iPad mit einem Handgriff an der Wand befestigt oder wieder entfernt werden.
Ferner verfügt die Baugruppe über eine integrierte Schaltung, die mittels Radarwellen die Anwesenheit von Personen um das iPad herum detektiert. Werden Personen erkannt, wird das iPad Display aktiviert und bei Abwesenheit deaktiviert.

Main components on the Magic-Tabmount
Magic-Tabmount bill of materials (BOM)
47 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | HLK-LD2410 | HDR-SMD_5P-P2.54-H-F_X6511FRS-19-C85D30 | U2 |
| 1 | DRV8834PWPR | HTSSOP-24_L7.8-W4.4-P0.65-BL-EP | U3 |
| 1 | MCP4725xxx-xCH | SOT-23-6 | U4 |
| 1 | SN74LV1T34DBV | SOT-23-5 | U5 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U6 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | MLX90248ESE-EBA-000-RE | SOT95P280X100-3N | U8 |
| 1 | BSS138BKS,115 | SOT-363_L2.0-W1.3-P0.65-LS2.1-BR | Q1 |
| 2 | GT-USB-7004B | USB-C-SMD_GT-USB-7004B | USB1, USB2 |
| 4 | SK6812 | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4 |
| 2 | 10uF | C_1206_3216Metric | C1, C9 |
| 1 | 22uF | C_1206_3216Metric | C2 |
| 6 | 100nF | C_1206_3216Metric | C3, C4, C5, C10, C13, C14 |
| 2 | 10nF | C_1206_3216Metric | C6, C8 |
| 1 | 2,2uF | C_1206_3216Metric | C7 |
| 2 | 100pF | C_1206_3216Metric | C11, C12 |
| 1 | 10uF | CP_Elec_5x3 | C15 |
| 2 | 5,1k | R_1206_3216Metric | R1, R2 |
| 1 | 62Ω | R_1206_3216Metric | R3 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0,4Ω | R_1206_3216Metric | R4, R5 |
| 5 | 10k | R_1206_3216Metric | R6, R13, R15, R16, R17 |
| 2 | 20k | R_1206_3216Metric | R7, R8 |
| 2 | 4,7k | R_1206_3216Metric | R9, R10 |
| 2 | 22k | R_1206_3216Metric | R11, R12 |
| 1 | 100k | R_1206_3216Metric | R14 |
Magic-Tabmount design files
The KiCad project lives in the mgiesen/Magic-Tabmount repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/KiCad Main/1.2.0.kicad_pcb
- SchematicPCB/KiCad Main/1.2.0.kicad_sch
Magic-Tabmount: common questions
What microcontroller does the Magic-Tabmount use?
The Magic-Tabmount is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Magic-Tabmount PCB?
The Magic-Tabmount measures 155.5 × 122 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Magic-Tabmount?
47 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Magic-Tabmount design files?
From the mgiesen/Magic-Tabmount repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Magic-Tabmount design in my own project?
The repository has no license, so all rights stay with mgiesen. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Magic-Tabmount without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k