ESPHome-Parking-Assistant
mikelawrence·ESPHome-Parking-Assistant·pcb/ESPHome-Parking-Assistant.kicad_pcb
About the ESPHome-Parking-Assistant PCB
ESPHome-Parking-Assistant is an open source ESP32 PCB design by mikelawrence, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 85 × 59 mm, with 107 components from 50 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the STUSB4500QTR, INA228AIDGSR, TPS560430XDBVR, TPS552872RYQR and TC4427VOA. By type, the board carries 39 capacitors, 39 resistors, 12 diodes, 7 ICs, 4 connectors and 2 switches.
It belongs with the iot & wireless, sensors and power & battery designs in this gallery.
From the project
Use a TFMini LiDAR module and a RGB light strip so you can park your car in the same spot everytime!
The PCB is designed in KiCad. Fabrication and Assembly is tuned toward JCLPCB. The production folder has everything you need for JLCPCB to send you fully assembled boards.

Main components on the ESPHome-Parking-Assistant
ESPHome-Parking-Assistant bill of materials (BOM)
107 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUSB4500QTR STUSB4500 STMicroelectronics | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U1 |
| 1 | INA228AIDGSR INA228 Texas Instruments | VSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | TPS560430XDBVR TPS560430 Texas Instruments | SOT-23-6 | U3 |
| 1 | TPS552872RYQR Texas Instruments | VQFN21_RYQ_TEX | U4 |
| 1 | ESP32-S3-WROOM-1-N8R8 ESP32-S3-WROOM-1 Espressif | ESP32-S3-WROOM-1 | U5 |
| 1 | TC4427VOA TC4427 Microchip | SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | SN74LV1T34DBV Texas Instruments | SOT-23-5 | U7 |
| 1 | STL9P3LLH6 STMicroelectronics | TRANS_STL9P3LLH6 | Q1 |
| 1 | TYPE-C-31-M-12 HRO | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 533980471 Molex | Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical | J2 |
| 1 | 533980671 Molex | Molex_PicoBlade_53398-0671_1x06-1MP_P1.25mm_Vertical | J3 |
| 1 | 1843813 Screw_Terminal_01x04 Phoenix Contact | PhoenixContact_MC_1,5_4-GF-3.5_1x04_P3.50mm_Horizontal_ThreadedFlange_MountHole | J4 |
| 1 | C2760295 3A | Fuse_1812_4532Metric | F1 |
| 1 | B3U-1000P RESET Omron | SW_SPST_B3U-1000P-B | SW1 |
| 1 | B3U-1000P BOOT Omron | SW_SPST_B3U-1000P-B | SW2 |
| 4 | ESDA25P35-1U1M STMicroelectronics | TVS_ESDA25P35-1U1M | D1, D4, D5, D8 |
| 2 | ESDA7P60-1U1M STMicroelectronics | TVS_ESDA25P35-1U1M | D2, D3 |
| 3 | F.0603.00026/P2-0603B1TS2-06T-001 Blue Tuozhan | LED_0603_1608Metric | D6, D7, D9 |
| 2 | F.0603.00025/P2-0603G1TS2-06T-002 Green Tuozhan | LED_0603_1608Metric | D10, D11 |
| 1 | WS2812B-2020 Worldsemi | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D12 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VLCF4028T-100M1R0-2 10uH TDK | IND_VLCF4028T-100M1R0-2 | L1 |
| 1 | IHLP2020CZER4R7M11 4.7uH Vishay-Dale | L_Vishay_IHLP-2020 | L2 |
| 7 | CL10A105KB8NNNC 1uF Samsung | C_0603_1608Metric | C1, C2, C14, C25, C35, C37, C39 |
| 14 | CL05B104KB54PNC 100nF Samsung | C_0402_1005Metric | C3, C4, C5, C7, C11, C12, C13, C19 +6 |
| 5 | CL31A106KBHNNNE 10uF Samsung | C_1206_3216Metric | C6, C20, C21, C24, C33 |
| 5 | LMK212BJ226MG-T 22uF Taio Yuden | C_0805_2012Metric | C8, C15, C16, C17, C32 |
| 2 | CC1206JRNPO9BN331 330pF Samsung | C_1206_3216Metric | C9, C10 |
| 2 | EEEFK1V221P 220uF Panasonic | CP_Elec_8x10.5 | C18, C23 |
| 1 | CL10A475KO8NNNC 4.7uF Samsung | C_0603_1608Metric | C26 |
| 2 | CL05B103KB5NNNC 10nF Samsung | C_0402_1005Metric | C27, C30 |
| 1 | CL05B272KB5NNNC 2.7nF Samsung | C_0402_1005Metric | C28 |
| 1 | 50mΩ | R_2512_6332Metric | R1 |
| 3 | 2KΩ | R_0402_1005Metric | R2, R8, R14 |
| 5 | 100KΩ | R_0402_1005Metric | R3, R21, R29, R30, R37 |
| 1 | 100Ω | R_0402_1005Metric | R4 |
| 2 | 22KΩ | R_0402_1005Metric | R5, R15 |
| 4 | 10Ω | R_0402_1005Metric | R6, R7, R19, R20 |
| 1 | 1MΩ | R_0402_1005Metric | R9 |
| 3 | 432Ω | R_0402_1005Metric | R10, R11, R12 |
| 1 | 51KΩ | R_0402_1005Metric | R13 |
| 2 | 2.2Ω | R_1206_3216Metric | R16, R17 |
| 1 | 25mΩ | R_0805_2012Metric | R18 |
| 1 | 8.2KΩ | R_0402_1005Metric | R22 |
| 1 | 15KΩ | R_0402_1005Metric | R23 |
| 1 | 31.6KΩ | R_0402_1005Metric | R24 |
| 1 | 48.7KΩ | R_0402_1005Metric | R25 |
| 7 | DNP | R_0402_1005Metric | R26, R31, R32, R33, R34, R35, R36 |
| 2 | 10KΩ | R_0402_1005Metric | R27, R28 |
| 1 | 33Ω | R_1210_3225Metric | R38 |
| 1 | 249Ω | R_1210_3225Metric | R39 |
ESPHome-Parking-Assistant design files
The KiCad project lives in the mikelawrence/ESPHome-Parking-Assistant repository on GitHub; these links point at the commit this page was built from.
ESPHome-Parking-Assistant: common questions
What microcontroller does the ESPHome-Parking-Assistant use?
The ESPHome-Parking-Assistant is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the ESPHome-Parking-Assistant PCB?
The ESPHome-Parking-Assistant measures 85 × 59 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESPHome-Parking-Assistant?
107 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESPHome-Parking-Assistant design files?
From the mikelawrence/ESPHome-Parking-Assistant repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESPHome-Parking-Assistant design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which mikelawrence chose for the repository.
Can I test firmware for the ESPHome-Parking-Assistant without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k