6 open source boards using the TPS560430XDBVR
Real designs built with the TPS560430XDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Analog i
deimoscontrols
223 × 95 mm568 parts4LNo license43STM32
SinESC
SAR-mango
30 × 15 mm84 parts4LGPL-3.029ESP32
ESPHome-Parking-Assistant
mikelawrence
85 × 59 mm107 parts4LCERN-OHL-P-2.00Camera-Cooler
lukaslibar
45 × 75 mm106 parts4LCustom license0PSU
Blaze-Pascal
50 × 26 mm28 parts4LGPL-3.02STM32
Stm32h7 base
deimoscontrols
80.7 × 74.5 mm191 parts4LNo license43
How designs wire the TPS560430XDBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS560430XDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The FB pin has a pull-up to 3.3V on 5 of 5 designs, most often 51 kΩ (then 120 kΩ).
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The SW pin has a inductor on 5 of 5 designs, most often 10 µH (then 12 µH).
- The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CBpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| FBpin 3 | Connected to: Signal 100% |
|
| ENpin 4 | Connected to: VBUS 80% · a signal 20% | — |
| VINpin 5 | Connected to: VBUS 80% · a signal 20% |
|
| SWpin 6 | Connected to: Signal 80% · 3.3V 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog i by deimoscontrols, SinESC by SAR-mango, PSU by Blaze-Pascal and Camera-Cooler by lukaslibar.
The TPS560430XDBVR in open source designs
The gallery holds 6 open source boards using the TPS560430XDBVR from 5 GitHub repositories; a typical one measures about 65.3 × 66.7 mm and carries around 107 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Analog i by deimoscontrols.
What boards using the TPS560430XDBVR are built for
TPS560430XDBVR: common questions
Where can I find a TPS560430XDBVR reference design?
Each of the 6 boards on this page is a real design using the TPS560430XDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the TPS560430XDBVR FB pin?
The FB pin has a pull-up to 3.3V on 5 of 5 designs, most often 51 kΩ (then 120 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPS560430XDBVR.
What decoupling capacitors do designs use on the TPS560430XDBVR VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the TPS560430XDBVR.
How is the TPS560430XDBVR SW pin connected?
The SW pin has a inductor on 5 of 5 designs, most often 10 µH (then 12 µH). Counted from the KiCad layouts of 5 open source designs using the TPS560430XDBVR.
Which microcontrollers do boards using the TPS560430XDBVR use?
Most are built on STM32 (3) and ESP32 (1).
How big is a typical board using the TPS560430XDBVR?
The median is 65.3 × 66.7 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS560430XDBVR?
By GitHub stars, Analog i by deimoscontrols, with 43 stars.
Can I simulate one of these boards using the TPS560430XDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.