Frugal iot v03
mitra42·frugal-iot-hw-lora·frugal_iot_v03/frugal_iot_v03.kicad_pcb
About the Frugal iot v03 PCB
Frugal iot v03 is an open source ESP32 PCB design by mitra42, published on GitHub. It is a 2-layer board measuring 64 × 37 mm, with 63 components from 36 distinct parts.
Its main chip is the ESP32-C3-WROOM-02U-N4, from the ESP32 family. Other key parts include the TP4056, XB5353A, ME6211C33M5G-N and SP3485EN-L/TR. By type, the board carries 23 resistors, 13 capacitors, 9 connectors, 5 ICs, 5 diodes and 4 jumpers.
It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.
From the project
Frugal-IoT sensor board with SX1262 LoRa radio (V0.3), branched from frugal-iot-hw-sensor
A simple, un-opinionated, multi-purpose sensor board, that can be wired to sensors using most common interfaces (I2C, ModBus, OneWire, Analog) with onboard charging and external antennas, plus a LoRa radio so boards can talk to each other where there is no WiFi.
This is the Frugal-IoT V0.2 sensor board with an SX1262 LoRa radio added.
Status: schematic for review (30 Oct 2026); layout in progress. See DECISIONS.md for requirements, decisions and the one open question (power budget with LoRa).
Main components on the Frugal iot v03
Frugal iot v03 bill of materials (BOM)
63 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm | U1 |
| 1 | XB5353A | SOT-23-5 | U2 |
| 1 | ME6211C33M5G-N ME6211C33M5G | SOT-23-5 | U3 |
| 1 | ESP32-C3-WROOM-02U-N4 | ESP32-C3-WROOM-02U | U4 |
| 1 | SP3485EN-L/TR SP3485EN | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | XY308-2.54-5P J2 SENSORS 1-5 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J2 |
| 1 | XY308-2.54-5P J3 RS485 1-5 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J3 |
| 1 | S2B-PH-K-S CELL | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J4 |
| 1 | XY308-2.54-3P GPIO10 | TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J5 |
| 1 | XY308-2.54-2P 5V IN (aux) | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J6 |
| 1 | EXT LED | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | XY308-2.54-5P J2 SENSORS 6-10 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J12 |
| 1 | XY308-2.54-5P J3 SPARE 6-10 | TerminalBlock_Xinya_XY308-2.54-5P_1x05_P2.54mm_Horizontal | J13 |
| 1 | 500mA | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | A/RX | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2 |
| 1 | B/TX | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP3 |
| 1 | TERM | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | TS-1187A-B-A-B RESET | SW_Push_1P1T_XKB_TS-1187A | SW1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TS-1187A-B-A-B BOOT | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | KT-0603R RED | LED_0603_1608Metric | D1 |
| 2 | KT-0805G GREEN | LED_0805_2012Metric | D2, D4 |
| 1 | SS34 | D_SMA | D3 |
| 1 | PSM712-LF-T7 PSM712 | SOT-23 | D5 |
| 5 | 10uF | C_0603_1608Metric | C1, C2, C4, C5, C8 |
| 6 | 100nF | C_0603_1608Metric | C3, C6, C9, C11, C12, C13 |
| 2 | 1uF | C_0603_1608Metric | C7, C10 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 6 | 4.7k | R_0603_1608Metric | R3, R4, R16, R17, R18, R19 |
| 3 | 1k | R_0603_1608Metric | R5, R6, R15 |
| 2 | 100k | R_0603_1608Metric | R7, R10 |
| 2 | 1M | R_0603_1608Metric | R8, R9 |
| 5 | 10k | R_0603_1608Metric | R11, R12, R13, R14, R20 |
| 2 | 680R | R_0603_1608Metric | R21, R22 |
| 1 | 120R | R_0603_1608Metric | R23 |
Frugal iot v03 design files
The KiCad project lives in the mitra42/frugal-iot-hw-lora repository on GitHub; these links point at the commit this page was built from.
Frugal iot v03: common questions
What microcontroller does the Frugal iot v03 use?
The Frugal iot v03 is built around the ESP32-C3-WROOM-02U-N4, from the ESP32 family.
How big is the Frugal iot v03 PCB?
The Frugal iot v03 measures 64 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Frugal iot v03?
63 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Frugal iot v03 design files?
From the mitra42/frugal-iot-hw-lora repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Frugal iot v03 design in my own project?
The repository has no license, so all rights stay with mitra42. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Frugal iot v03 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in frugal-iot-hw-lora
ESP32
Before backlabels
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before stitch
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before polarity
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before rescue2
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before silk
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before join
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before rescue
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before pour
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Prerouted
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before import
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before islands
mitra42
64 × 37 mm63 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k