RGB-LED-Pendant

mjhaahr·RGB-LED-Pendant·Small_Pendant/Small_Pendant.kicad_pcb

RGB-LED-Pendant PCB layout, top view — open source ESP32 board by mjhaahr

About the RGB-LED-Pendant PCB

RGB-LED-Pendant is an open source ESP32 PCB design by mjhaahr, published on GitHub under the MIT license. It is a 4-layer board measuring 75 × 70 mm, with 235 components from 27 distinct parts.

Its main chip is the ESP32-C3-MINI-1, from the ESP32 family. Other key parts include the AP2112K-3.3, BNO055 and SN74LVC1T45DCK. By type, the board carries 180 diodes, 28 capacitors, 13 resistors, 7 connectors, 4 ICs and 3 switches.

It belongs with the displays & leds, sensors and iot & wireless designs in this gallery.

From the project

Small RGB LED Pendant using 1010 (1.0x1.0mm) WS2812B LEDs powered by an ESP32-C3 Mini with a BNO055 IMU

Features: - 177 Addressable RGB LEDs - WS2812B-style (NeoPixel) control - Xinglight XL-1010RGBC-WS2812B - Two-board design for tight packaging - Front board contains the LED Matrix - Back board holds the Microcontroller, IMU, and Power Regulation - ESP32-C3 Module for control - Allows pattern changing over WiFi/Bluetooth, as well as the buttons on the device - Onboard IMU to generate reactive patterns - Utilizes a Bosch BNO055 for the simplicity of the orientation solution - USB C Port for Power, Comms, and Programming - Connects to the ESP32-C3's onboard USB-CDC/JTAG device

RGB-LED-Pendant, from the project README
From the project README

Main components on the RGB-LED-Pendant

RGB-LED-Pendant bill of materials (BOM)

235 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-MINI-1
U1
1
AP2112K-3.3
U2
1
BNO055
U3
1
SN74LVC1T45DCK
U4
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
2
INTERBOARD-F1
Interboard-F1
J2, J3
1
INTERBOARD-F2
Interboard-F2
J4
2
INTERBOARD-M1
Interboard-M1
J5, J6
1
INTERBOARD-M2
Interboard-M2
J7
3
SW_Push
SW1, SW2, SW3
1
TPD2EUSB30
D1
1
ESD441DPLR
D2
1
GREEN
D3
177
XL-1010RGBC-WS2812B
D4, D5, D6, D7, D8, D9, D10, D11 +169
4
10UF
10uF
C1, C8, C9, C16
18
100NF
100nF
C2, C4, C5, C10, C13, C14, C17, C18 +10
3
1UF
1uF
C3, C12, C15
2
22PF
22pF
C6, C7
1
120NF
120nF
C11
2
3.3K
3.3k
R1, R2
Show 7 more
QtyPartRefs
3
10K
10k
R3, R8, R9
1
1K3
1k3
R4
2
0
R5, R6
1
100K
100k
R7
2
5K1
5k1
R10, R11
1
10k
R12
1
10K
470
R13

RGB-LED-Pendant design files

The KiCad project lives in the mjhaahr/RGB-LED-Pendant repository on GitHub; these links point at the commit this page was built from.

RGB-LED-Pendant: common questions

What microcontroller does the RGB-LED-Pendant use?

The RGB-LED-Pendant is built around the ESP32-C3-MINI-1, from the ESP32 family.

How big is the RGB-LED-Pendant PCB?

The RGB-LED-Pendant measures 75 × 70 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RGB-LED-Pendant?

235 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RGB-LED-Pendant design files?

From the mjhaahr/RGB-LED-Pendant repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RGB-LED-Pendant design in my own project?

Yes, under the terms of its MIT license, which mjhaahr chose for the repository.

Can I test firmware for the RGB-LED-Pendant without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards