26 open source boards using the SN74LVC1T45DCK
Real designs built with the SN74LVC1T45DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Endeavour2
petrmikheev
100 × 85 mm263 parts6LGPL-3.049HSLinkPro
cherry-embedded
44 × 44 mm144 parts4LApache-2.044FPGA
CPArti-FPGA-Development-Board
AAWO
100 × 100 mm393 parts4LNo license13ESP32
RGB-LED-Pendant
mjhaahr
75 × 70 mm235 parts4LMIT2RP2040/RP2350
DanceConIO
ravinrabbid
79 × 57.3 mm100 parts2LMIT1ESP32
Esp32 s3 dwm3000 uwb anchor with relay outputs
Takingo
160 × 100 mm322 parts4LNo license0RP2040/RP2350
OrthoTest
extinct00
233.7 × 127.3 mm244 parts2LNo license0RP2040/RP2350
Nifty Numpad
Acliad
118.4 × 129.7 mm170 parts2LCERN-OHL-1.20Wius new
ssavazzi02
54 × 28 mm138 parts6LNo license0STM32
Gpsdo
AndreasArendt
70 × 70 mm71 parts4LMIT0STM32
Rocket2-trs hardware
UCI-Rocket-Project
65.8 × 60.2 mm62 parts2LNo license0ESP32
Endeavour2 upd
petrmikheev
100 × 85 mm238 parts6LGPL-3.049Quantum mind uwb rtls anchor v3 0
Takingo
220 × 140 mm193 parts4LNo license0RP2040/RP2350
Nifty Numpad before sockets
Acliad
118.4 × 131 mm170 parts4LCERN-OHL-1.20Wius placement 1
ssavazzi02
54 × 28 mm130 parts6LNo license0Leaf dongle
marcuswu
21 × 60.4 mm7 parts2LMIT0Quantum mind uwb rtls anchor v3 0 fr224 java25 test
Takingo
220 × 140 mm193 parts4LNo license0Quantum mind uwb rtls anchor v3 0 fr224 test
Takingo
220 × 140 mm193 parts4LNo license0Bridge 5v project
Takingo
130 × 46 mm75 parts4LNo license0BIDIR-5V
Thierry-oshw
10 × 48.3 mm8 parts2LCERN-OHL-P-2.00Bridge 5v project f
Takingo
130 × 46 mm75 parts4LNo license0Bridge experiment
Takingo
130 × 46 mm75 parts4LNo license0Bridge experiment project
Takingo
130 × 46 mm75 parts4LNo license0Bridge experiment project2
Takingo
130 × 46 mm75 parts4LNo license0Bridge experiment project3
Takingo
130 × 46 mm75 parts4LNo license0Gap bridge project
Takingo
130 × 46 mm75 parts4LNo license0
How designs wire the SN74LVC1T45DCK
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the SN74LVC1T45DCK connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF.
- The VCCB pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 92% |
|
| GNDpin 2 | Connected to: GND 92% | — |
| VCCBpin 6 | Connected to: 5V 85% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Endeavour2 by petrmikheev, HSLinkPro by cherry-embedded, CPArti-FPGA-Development-Board by AAWO and RGB-LED-Pendant by mjhaahr.
The SN74LVC1T45DCK in open source designs
The gallery holds 26 open source boards using the SN74LVC1T45DCK from 13 GitHub repositories; a typical one measures about 118.3 × 60.3 mm and carries around 134 components.
77% use four copper layers or more, and 38% carry an open source license.
The most starred is Endeavour2 by petrmikheev.
Parts used alongside the SN74LVC1T45DCK
Microcontrollers on boards using the SN74LVC1T45DCK
What boards using the SN74LVC1T45DCK are built for
SN74LVC1T45DCK: common questions
Where can I find a SN74LVC1T45DCK reference design?
Each of the 26 boards on this page is a real design using the SN74LVC1T45DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1T45DCK VCCA pin?
The VCCA pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the SN74LVC1T45DCK.
What decoupling capacitors do designs use on the SN74LVC1T45DCK VCCB pin?
The VCCB pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the SN74LVC1T45DCK.
Which microcontrollers do boards using the SN74LVC1T45DCK use?
Most are built on ESP32 (4), RP2040/RP2350 (4), STM32 (2) and FPGA (1).
How big is a typical board using the SN74LVC1T45DCK?
The median is 118.3 × 60.3 mm, and 23% are two-layer designs.
What is the most popular open source board using the SN74LVC1T45DCK?
By GitHub stars, Endeavour2 by petrmikheev, with 49 stars.
Can I simulate one of these boards using the SN74LVC1T45DCK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.