Music system
mkno04·Music-system
About the Music system PCB
Music system is an open source ESP32 PCB design by mkno04, published on GitHub. It is a 2-layer board measuring 50 × 70 mm, with 109 components from 47 distinct parts.
Its main chip is the ESP32-S3-WROOM, from the ESP32 family. Other key parts include the PCM5102A, BQ21040DBVR, TPS63001DRCR and XCVR_ESP32-WROVER. By type, the board carries 40 resistors, 39 capacitors, 10 connectors, 6 ICs, 5 transistors and 5 diodes.
Main components on the Music system
Music system bill of materials (BOM)
109 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | BQ21040DBVR BQ25306RTER | IC_BQ25306RTER | U2 |
| 2 | TPS63001DRCR | TPS63000DRCR | U3, U4 |
| 1 | ESP32-S3-WROOM | ESP32-S3-WROOM1-N4R2 | U5 |
| 1 | XCVR_ESP32-WROVER ESP32-WROVER-IE-N16R8 | XCVR_ESP32-WROVER | U6 |
| 3 | SI2304 | SOT-23 | Q2, Q3, Q5 |
| 1 | SI2301 Si2301 | SOT-23 | Q4 |
| 1 | SI2304 | SOT-23 | Q6 |
| 1 | SJ2-3574A-SMT SJ2-3574A-SMT-TR | CUI_SJ2-3574A-SMT-TR | J1 |
| 1 | CONN_01X03 Conn_01x03 | jst 1.25 3 pole | J2 |
| 1 | Conn_01x05 | JST-5P_1.25mm | J3 |
| 2 | Conn_01x02 | PinHeader_1x02_P1.27mm_Vertical | J4, J7 |
| 1 | CONN_01X13 Conn_01x13 | JST_GH_SM13B-GHS-TB_1x13-1MP_P1.25mm_Horizontal | J5 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.00mm_Vertical | J6 |
| 1 | CONN_01X05 Conn_01x05 | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J8 |
| 1 | 1051620001 | 105162-0001_MOL | J9 |
| 1 | Conn_01x03 | PinHeader_1x03_P1.27mm_Vertical | J10 |
| 1 | SW_SPST | 4312560587X6 | SW1 |
| 1 | SS34 | D_SMA | D1 |
| 1 | SMAJ5.0A | D_SMA | D2 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1N4148 | D_SOD-323 | D3, D4 |
| 1 | LED | LED_0402_1005Metric | D5 |
| 1 | SRN8040-100M_INDUCWAVESHARE SRN8040-100M_INDUC | IND_IHLP-2525CZ-01_VIS-M | L1 |
| 1 | SRN8040-100M_INDUCWAVESHARE 2.2uH | IND_IHLP-2525CZ-01_VIS-M | L2 |
| 1 | 2.2uH | L_Abracon_ASPI-0630LR | L3 |
| 14 | 10UF 10uF | C_0603_1608Metric | C1, C3, C5, C8, C11, C13, C15, C16 +6 |
| 15 | 0.1UF 0.1uF | C_0603_1608Metric | C2, C4, C6, C9, C12, C14, C23, C27 +7 |
| 3 | 2.2UF 2.2uF | C_0603_1608Metric | C7, C10, C17 |
| 2 | 0.1UF 0.1uF | C_0402_1005Metric | C19, C26 |
| 1 | 2.2UF 10uF | C_0603_1608Metric | C20 |
| 1 | 10uF | C_0603_1608Metric | C36 |
| 1 | 2.2uF | C_0603_1608Metric | C37 |
| 1 | 470pF | C_0603_1608Metric | C38 |
| 1 | 47nF | C_0603_1608Metric | C39 |
| 3 | 470E | R_0402_1005Metric | R1, R2, R34 |
| 2 | 0E | R_0402_1005Metric | R3, R47 |
| 19 | 10K | R_0402_1005Metric | R4, R12, R13, R15, R16, R17, R18, R19 +11 |
| 2 | 100E | R_0402_1005Metric | R11, R14 |
| 1 | 200K | R_0402_1005Metric | R27 |
| 1 | 220E | R_0402_1005Metric | R30 |
| 1 | 220K | R_0402_1005Metric | R32 |
| 1 | 100K 10K | R_0402_1005Metric | R33 |
| 4 | 10K | R_0402_1005Metric | R36, R41, R45, R46 |
| 3 | 300E | R_0402_1005Metric | R37, R38, R39 |
| 1 | 20K | R_0402_1005Metric | R42 |
| 1 | 560K | R_0402_1005Metric | R43 |
| 1 | 200k | R_0402_1005Metric | R44 |
Music system design files
The KiCad project lives in the mkno04/Music-system repository on GitHub; these links point at the commit this page was built from.
Music system: common questions
What microcontroller does the Music system use?
The Music system is built around the ESP32-S3-WROOM, from the ESP32 family.
How big is the Music system PCB?
The Music system measures 50 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Music system?
109 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Music system design files?
From the mkno04/Music-system repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Music system design in my own project?
The repository has no license, so all rights stay with mkno04. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Music system without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k