DATALOGGER02
About the DATALOGGER02 PCB
DATALOGGER02 is an open source AVR/Arduino PCB design by mlab-modules, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 101.1 × 60.5 mm, with 153 components from 89 distinct parts.
Its main chip is the ATMEGA1284P-AU, from the AVR/Arduino family. Other key parts include the CY15B108QN-40SXI, FM3164-S, LTC4041EUFD#PBF, ISL21080CIH320Z-TK and LM4041CIM3-1.2(neosazovat). By type, the board carries 53 capacitors, 44 resistors, 16 connectors, 15 ICs, 11 inductors and 4 jumpers.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
Arduino based data logger with LoRa IoT interface.
Main components on the DATALOGGER02
DATALOGGER02 bill of materials (BOM)
153 components, 89 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CY15B108QN-40SXI | SOIC-8_3.9x4.9mm_Pitch1.27mm | IC1 |
| 1 | FM3164-S FM3164-G | SOIC-14_3.9x8.7mm_P1.27mm | IC2 |
| 1 | LTC4041EUFD#PBF | QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm | IC3 |
| 1 | ISL21080CIH320Z-TK | SOT-23 | U1 |
| 1 | LM4041CIM3-1.2(neosazovat) | SOT-23 | U2 |
| 1 | ATMEGA1284P-AU | TQFP-44_10x10mm_P0.8mm | U3 |
| 1 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | ICM-20948 | InvenSense_QFN-24_3x3mm_P0.4mm | U5 |
| 1 | TPS22965-Q1 | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U6 |
| 1 | MS5611-01BA | LGA-8_3x5mm_P1.25mm | U7 |
| 1 | MIC5504-1.8YM5 MIC5504-1.8YM5-TR | SOT-23-5 | U8 |
| 2 | TPS631000DRLR | SOT-583-8 | U9, U10 |
| 1 | SX1262 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U11 |
| 1 | PE4259 | SOT-363_SC-70-6 | U12 |
| 1 | DMP2045UQ-7 | SOT-23 | Q1 |
| 2 | DMT31M7LPS-13 DMTH3002LPS | D_POWERDI5060-8_6.0x5.1mm_P1.27mm | Q2, Q3 |
| 1 | 6pF crystal - 32.768kHz | ABS07 | Y2 |
| 1 | 32MHZ 32MHz | Crystal_SMD_NX2016SA | Y3 |
| 1 | 8MHz LFXTAL083138 | Crystal SMD CFPX-180 | Y6 |
| 1 | HEADER_2X01_PARALLEL HEADER_2x01_PARALLEL | Straight_2x01 | J1 |
Show 69 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HEADER_2X01 HEADER_2x01 | Straight_2x01 | J2 |
| 1 | HEADER_2X03 HEADER_2x03 | SMD_2x03_WO_paste | J3 |
| 1 | HEADER_2X03_PARALLEL HEADER_2x03_PARALLEL | Straight_2x03 | J4 |
| 2 | HEADER_2x03_PARALLEL | Straight_2x03 | J5, J24 |
| 1 | MCC-SD (kouka z modulu) | MCC-SD | J6 |
| 2 | Conn_01x06_Female | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J7, J14 |
| 1 | CONN_01X07_FEMALE Conn_01x07_Female | JST_GH_SM07B-GHS-TB_1x07-1MP_P1.25mm_Horizontal | J8 |
| 1 | CONN_01X04_FEMALE Conn_01x04_Female | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J9 |
| 2 | HEADER_2x05_PARALLEL | Straight_2x05 | J10, J12 |
| 1 | HEADER_2X07_PARALLEL HEADER_2x07_PARALLEL | Straight_2x07 | J11 |
| 1 | HEADER_2X02_PARALLEL HEADER_2x02_PARALLEL | Straight_2x02 | J13 |
| 1 | VAL** | MCX | J23 |
| 1 | Battery_Cell-device 3V | BatteryHolder_Keystone_2998_1x6.8mm | BT1 |
| 1 | 1.2A | 1812 | F1 |
| 4 | SolderJumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4 |
| 1 | KPTR-3216SURCK HLMP-K150+FIX-LED-313 | LED_1206_mill | D1 |
| 1 | M4 | Diode-SMA_Standard | D2 |
| 1 | 10uH - LQH32CN100K23L | SMD-1210 | L1 |
| 1 | XAL-6030-182 1.8 uH | XAL6030181MEC | L2 |
| 2 | 1uH - DFE252012P-1R0M=P2 | L_1008_2520Metric | L3, L4 |
| 1 | 15UH 15uH | L_0805_2012Metric | L5 |
| 1 | 15NH 15nH | L_0603_1608Metric | L6 |
| 1 | 0R | L_0603_1608Metric | L7 |
| 1 | 47NH 47nH | L_0603_1608Metric | L8 |
| 1 | 2N4 2n4 | L_0603_1608Metric | L9 |
| 1 | 4N7 4n7 | L_0603_1608Metric | L10 |
| 1 | 9N1 9n1 | L_0603_1608Metric | L11 |
| 18 | 100nF | C_0805_2012Metric | C1, C2, C5, C6, C9, C10, C14, C15 +10 |
| 2 | 15pF | C_0805_2012Metric | C3, C4 |
| 2 | 10uF | C_0805_2012Metric | C7, C23 |
| 1 | 4U7 4u7 | C_0805_2012Metric | C8 |
| 3 | 22uF | C_0805_2012Metric | C11, C33, C39 |
| 4 | 47uF | C_0805_2012Metric | C12, C13, C29, C34 |
| 2 | 1UF 1uF | C_0805_2012Metric | C20, C44 |
| 1 | 1NF 1nF | C_0805_2012Metric | C21 |
| 2 | 1nF | C_0805_2012Metric | C26, C56 |
| 2 | 1uF | C_0805_2012Metric | C27, C31 |
| 1 | 50F | CP_Radial_D18.0mm_P7.50mm | C28 |
| 1 | 470NF 470nF | C_0805_2012Metric | C43 |
| 1 | 100NF 100nF | C_0805_2012Metric | C45 |
| 1 | 47NF 47nF | C_0805_2012Metric | C46 |
| 1 | 1P8 1p8 | C_0603_1608Metric | C47 |
| 1 | 47PF 47pF | C_0805_2012Metric | C48 |
| 1 | 2P4 2p4 | C_0603_1608Metric | C49 |
| 2 | - | C_0603_1608Metric | C50, C51 |
| 3 | 3p3 | C_0603_1608Metric | C52, C58, C59 |
| 1 | 5P6 5p6 | C_0603_1608Metric | C53 |
| 2 | 39pF | C_0603_1608Metric | C54, C57 |
| 1 | 2P2 2p2 | C_0603_1608Metric | C55 |
| 1 | - | R_0805_2012Metric | R1 |
| 1 | 4K7 4k7 | R_0805_2012Metric | R2 |
| 2 | 10K 10k | R_0805_2012Metric | R3, R46 |
| 14 | 10k | R_0805_2012Metric | R5, R6, R8, R9, R10, R11, R14, R15 +6 |
| 1 | 470R | R_0805_2012Metric | R20 |
| 2 | 150k | R_0805_2012Metric | R22, R29 |
| 2 | 56k | R_0805_2012Metric | R23, R30 |
| 4 | 100 | R_0805_2012Metric | R24, R25, R26, R27 |
| 1 | 2K2 2k2 | R_0805_2012Metric | R28 |
| 1 | 1M | R_0805_2012Metric | R31 |
| 5 | 100k | R_0805_2012Metric | R32, R33, R34, R39, R41 |
| 1 | 6.2k 1/8W | R_0805_2012Metric | R35 |
| 1 | 2k | R_0805_2012Metric | R36 |
| 1 | 25MR 25mR | R_0805_2012Metric | R37 |
| 1 | 523k (E96) | R_0805_2012Metric | R38 |
| 1 | 220K 220k | R_0805_2012Metric | R40 |
| 1 | 806K 806k | R_0805_2012Metric | R42 |
| 2 | 91k | R_0805_2012Metric | R43, R45 |
| 1 | 511K 511k | R_0805_2012Metric | R44 |
| 1 | 100R | R_0805_2012Metric | R47 |
DATALOGGER02 design files
The KiCad project lives in the mlab-modules/DATALOGGER02 repository on GitHub; these links point at the commit this page was built from.
DATALOGGER02: common questions
What microcontroller does the DATALOGGER02 use?
The DATALOGGER02 is built around the ATMEGA1284P-AU, from the AVR/Arduino family.
How big is the DATALOGGER02 PCB?
The DATALOGGER02 measures 101.1 × 60.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DATALOGGER02?
153 components, from 89 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DATALOGGER02 design files?
From the mlab-modules/DATALOGGER02 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DATALOGGER02 design in my own project?
Yes, under the terms of its GPL-3.0 license, which mlab-modules chose for the repository.
Can I test firmware for the DATALOGGER02 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746