7 open source boards using the SX1262

Real designs built with the SX1262, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the SX1262

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SX1262 connects to, and the resistors, capacitors and other passives placed on it.

  • The XTA pin has a crystal on 3 of 5 designs, most often 32 MHz.
  • The XTB pin has a crystal on 3 of 5 designs, most often 32 MHz.
  • The VREG pin has a capacitor to GND on 3 of 5 designs, most often 470 nF.
  • The VREG pin has a inductor on 3 of 5 designs, most often 15 µH.
VDD_INpin 1Connected to: 3.3V 80% · not connected 20%
  • Decoupling capacitor on 40% · 100 nF (3)
GNDpin 2, 5, 8, 20, 25Connected to: GND 81%
XTApin 3Connected to: Signal 80% · VDD_CPU 20%
  • Crystal on 60% · 32 MHz (2)
XTBpin 4Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 32 MHz (2)
VREGpin 7Connected to: Signal 100%
  • Capacitor to GND on 60% · 470 nF (3)
  • Inductor on 60% · 15 µH (3)
DCC_SWpin 9Connected to: Signal 80% · GND 20%
  • Inductor on 60% · 15 µH (3)
VBATpin 10Connected to: 3.3V 75% · a signal 25%
  • Decoupling capacitor on 75% · 100 nF (3), 1 µF (2)
VBAT_IOpin 11Connected to: 3.3V 75% · not connected 25%
  • Decoupling capacitor on 75% · 100 nF (3), 1 µF (2)
DIO2pin 12Connected to: The microcontroller 60% · not connected 20%
  • Series resistor on 60% · 100 Ω (2), 22 Ω (1)
RESETpin 15Connected to: The microcontroller 75%
  • Pull-up to 3.3V on 50% · 10 kΩ (2)
RFI_Ppin 21Connected to: Signal 100%
  • Inductor on 100% · 15 nH (2), 9.1 nH (1)
  • Capacitor to GND on 67% · 1.8 pF (2)
RFI_Npin 22Connected to: Signal 100%
  • Inductor on 100% · 15 nH (2), 9.1 nH (1)
  • Series capacitor on 100% · 2.4 pF (2), 1 nF (1)
RFOpin 23Connected to: Signal 100%
  • Inductor on 100% · 8.2 nH (1)
VR_PApin 24Connected to: Signal 100%
  • Inductor on 100% · 47 nH (2), 3.9 nH (1)
  • Capacitor to GND on 100% · 47 pF (4), 47 nF (2)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ISM02 by mlab-modules, Accoustic Sensing Node by irocobble, Pollen scout by jayis1 and DATALOGGER02 by mlab-modules.

The SX1262 in open source designs

The gallery holds 7 open source boards using the SX1262 from 7 GitHub repositories; a typical one measures about 80 × 49.8 mm and carries around 92 components.

60% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is ISM02 by mlab-modules.

Parts used alongside the SX1262

Microcontrollers on boards using the SX1262

SX1262: common questions

Where can I find a SX1262 reference design?

Each of the 7 boards on this page is a real design using the SX1262. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SX1262 XTA pin connected?

The XTA pin has a crystal on 3 of 5 designs, most often 32 MHz. Counted from the KiCad layouts of 5 open source designs using the SX1262.

How is the SX1262 XTB pin connected?

The XTB pin has a crystal on 3 of 5 designs, most often 32 MHz. Counted from the KiCad layouts of 5 open source designs using the SX1262.

How is the SX1262 VREG pin connected?

The VREG pin has a capacitor to GND on 3 of 5 designs, most often 470 nF. Counted from the KiCad layouts of 5 open source designs using the SX1262.

What parts are used alongside the SX1262?

The PE4259, BME280 and MAX-M10S appear in the most repositories here.

Which microcontrollers do boards using the SX1262 use?

Most are built on ESP32 (3), AVR/Arduino (2) and RP2040/RP2350 (1).

How big is a typical board using the SX1262?

The median is 80 × 49.8 mm, and 60% are two-layer designs.

What is the most popular open source board using the SX1262?

By GitHub stars, ISM02 by mlab-modules, with 1 stars.

Can I simulate one of these boards using the SX1262 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part