10 open source boards using the ATMEGA1284P-AU
Real designs built with the ATMEGA1284P-AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Xling
mcusim
35 × 47 mm60 parts2LNo license67AVR/Arduino
SPACEDOS02
UniversalScientificTechnologies
38 × 200 mm120 parts2LGPL-3.07AVR/Arduino
BATDATUNIT01
mlab-modules
136.2 × 85.9 mm206 parts2LGPL-3.05AVR/Arduino
SPACEDOS01
UniversalScientificTechnologies
93.5 × 48.2 mm79 parts2LGPL-3.05AVR/Arduino
HB-UNI-TEST-PROG-BOARD V2.2
chianti2000
200.8 × 100.3 mm86 parts2LNo license3AVR/Arduino
DATALOGGER01
mlab-modules
80.8 × 101.1 mm87 parts2LGPL-3.01AVR/Arduino
Spaceduino
UWCubeSat
69 × 69 mm81 parts2LMIT1AVR/Arduino
TFUNIPAYLOAD01
ThunderFly-aerospace
70.6 × 50.3 mm67 parts2LGPL-3.01AVR/Arduino
USTSIPIN02
ust-modules
90.9 × 50.3 mm153 parts4LGPL-3.00AVR/Arduino
DATALOGGER02
mlab-modules
101.1 × 60.5 mm153 parts2LGPL-3.00
How designs wire the ATMEGA1284P-AU
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ATMEGA1284P-AU connects to, and the resistors, capacitors and other passives placed on it.
- The RESET pin has a pull-up to 3.3V on 10 of 10 designs, most often 10 kΩ (then 100 kΩ).
- The AREF pin has a capacitor to GND on 10 of 10 designs, most often 100 nF (then 10 µF).
- The RESET pin has a series capacitor on 9 of 10 designs, most often 4.7 µF (then 100 nF).
- The VCC pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PB5pin 1 | Connected to: A connector 90% |
|
| PB6pin 2 | Connected to: A connector 90% |
|
| PB7pin 3 | Connected to: A connector 90% |
|
| RESETpin 4 | Connected to: A connector 100% |
|
| VCCpin 5, 17, 38 | Connected to: 3.3V 100% |
|
| GNDpin 6, 18, 28, 39 | Connected to: GND 100% | — |
| XTAL2pin 7 | Connected to: Signal 80% · not connected 20% |
|
| XTAL1pin 8 | Connected to: Signal 80% · not connected 20% |
|
| PD0pin 9 | Connected to: A connector 40% · not connected 20% |
|
| PD1pin 10 | Connected to: A connector 40% · not connected 20% |
|
| PD2pin 11 | Connected to: A connector 60% · not connected 20% |
|
| PD3pin 12 | Connected to: A connector 60% · not connected 20% |
|
| PD4pin 13 | Connected to: Not connected 50% · a signal 50% |
|
| PD5pin 14 | Connected to: Not connected 60% · a signal 40% |
|
| PD6pin 15 | Connected to: Not connected 60% · a signal 40% |
|
| PC0pin 19 | Connected to: PCF85263A 40%, a connector 40%, AT24CS64-SSHM 30% |
|
| PC1pin 20 | Connected to: PCF85263A 40%, a connector 40%, AT24CS64-SSHM 30% |
|
| PC5pin 24 | Connected to: A connector 20% · not connected 30% |
|
| PC7pin 26 | Connected to: A connector 20% · not connected 30% |
|
| AVCCpin 27 | Connected to: AVCC 80% · a signal 20% |
|
| AREFpin 29 | Connected to: A connector 30% |
|
| PA7pin 30 | Connected to: Not connected 60% · a signal 40% |
|
| PA6pin 31 | Connected to: Not connected 60% · a signal 40% | — |
| PA5pin 32 | Connected to: Not connected 60% · a signal 40% | — |
| PA4pin 33 | Connected to: Not connected 60% · a signal 40% | — |
| PA3pin 34 | Connected to: A connector 20% · not connected 40% |
|
| PA1pin 36 | Connected to: A connector 50%, OPA2314 30%, ISL21080DIH312Z-TK 1V25 20% · not connected 20% |
|
| PA0pin 37 | Connected to: A connector 50% |
|
| PB0pin 40 | Connected to: A connector 40%, TS5A4594 30% · not connected 20% |
|
| PB4pin 44 | Connected to: A connector 20% · not connected 20% |
|
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Xling by mcusim, SPACEDOS02 by UniversalScientificTechnologies, BATDATUNIT01 by mlab-modules and SPACEDOS01 by UniversalScientificTechnologies.
The ATMEGA1284P-AU in open source designs
The gallery holds 10 open source boards using the ATMEGA1284P-AU from 10 GitHub repositories; a typical one measures about 85.8 × 64.7 mm and carries around 87 components.
90% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Xling by mcusim.
Parts used alongside the ATMEGA1284P-AU
Microcontrollers on boards using the ATMEGA1284P-AU
What boards using the ATMEGA1284P-AU are built for
ATMEGA1284P-AU: common questions
Where can I find a ATMEGA1284P-AU reference design?
Each of the 10 boards on this page is a real design using the ATMEGA1284P-AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ATMEGA1284P-AU RESET pin?
The RESET pin has a pull-up to 3.3V on 10 of 10 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 10 open source designs using the ATMEGA1284P-AU.
How is the ATMEGA1284P-AU AREF pin connected?
The AREF pin has a capacitor to GND on 10 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the ATMEGA1284P-AU.
What decoupling capacitors do designs use on the ATMEGA1284P-AU VCC pin?
The VCC pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the ATMEGA1284P-AU.
What parts are used alongside the ATMEGA1284P-AU?
The PCF85263A, AT24CS64-SSHM, OPA2314, TPS22965-Q1 and TPS613222ADBV appear in the most repositories here.
Which microcontrollers do boards using the ATMEGA1284P-AU use?
Most are built on AVR/Arduino (10).
How big is a typical board using the ATMEGA1284P-AU?
The median is 85.8 × 64.7 mm, and 90% are two-layer designs.
What is the most popular open source board using the ATMEGA1284P-AU?
By GitHub stars, Xling by mcusim, with 67 stars.
Can I simulate one of these boards using the ATMEGA1284P-AU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.