27 open source boards using the TPS631000DRLR

Real designs built with the TPS631000DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

27 boardsClear filters|Most starred

How designs wire the TPS631000DRLR

Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the TPS631000DRLR connects to, and the resistors, capacitors and other passives placed on it.

  • The FB pin has a resistor to GND on 21 of 21 designs, most often 91 kΩ (then 91 Ω).
  • The VOUT pin has a decoupling capacitor on 20 of 21 designs, most often 47 µF (then 10 µF).
  • The VIN pin has a decoupling capacitor on 20 of 21 designs, most often 10 µF (then 22 µF).
  • The FB pin has a pull-up to 3.3V on 20 of 21 designs, most often 511 kΩ (then 806 Ω).
VOUTpin 1Connected to: 3.3V 95%
  • Decoupling capacitor on 95% · 47 µF (16), 10 µF (11), 2.2 µF (2)
LX2pin 2Connected to: Signal 100%
  • Inductor on 90% · 1 µH (16)
LX1pin 3Connected to: Signal 100%
  • Inductor on 90% · 1 µH (16)
VINpin 4Connected to: VSW 57% · a signal 43%
  • Decoupling capacitor on 95% · 10 µF (17), 22 µF (15), 100 nF (3)
ENpin 5Connected to: Signal 57% · VSW 43%
  • Capacitor to GND on 71% · 10 µF (15), 22 µF (11), 100 nF (3)
GNDpin 7Connected to: GND 100%
FBpin 8Connected to: Signal 100%
  • Resistor to GND on 100% · 91 kΩ (15), 91 Ω (5), 100 kΩ (1)
  • Pull-up to 3.3V on 95% · 511 kΩ (11), 806 Ω (5), 510 kΩ (2)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Racer by StuckAtPrototype, Keyword by notaroomba, Thumbtroller by StuckAtPrototype and PCB business card remake by StuckAtPrototype.

The TPS631000DRLR in open source designs

The gallery holds 27 open source boards using the TPS631000DRLR from 21 GitHub repositories; a typical one measures about 56 × 60 mm and carries around 73 components.

74% use four copper layers or more, and 41% carry an open source license.

The most starred is Racer by StuckAtPrototype.

Microcontrollers on boards using the TPS631000DRLR

TPS631000DRLR: common questions

Where can I find a TPS631000DRLR reference design?

Each of the 27 boards on this page is a real design using the TPS631000DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TPS631000DRLR FB pin?

The FB pin has a resistor to GND on 21 of 21 designs, most often 91 kΩ (then 91 Ω). Counted from the KiCad layouts of 21 open source designs using the TPS631000DRLR.

What decoupling capacitors do designs use on the TPS631000DRLR VOUT pin?

The VOUT pin has a decoupling capacitor on 20 of 21 designs, most often 47 µF (then 10 µF). Counted from the KiCad layouts of 21 open source designs using the TPS631000DRLR.

What decoupling capacitors do designs use on the TPS631000DRLR VIN pin?

The VIN pin has a decoupling capacitor on 20 of 21 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 21 open source designs using the TPS631000DRLR.

What parts are used alongside the TPS631000DRLR?

The ESP32-H2-MINI-1, A3908, ATMEGA1284P-AU, MCP73833 and AP2204 appear in the most repositories here.

Which microcontrollers do boards using the TPS631000DRLR use?

Most are built on ESP32 (11), STM32 (8), AVR/Arduino (3) and RP2040/RP2350 (2).

How big is a typical board using the TPS631000DRLR?

The median is 56 × 60 mm, and 26% are two-layer designs.

What is the most popular open source board using the TPS631000DRLR?

By GitHub stars, Racer by StuckAtPrototype, with 3,798 stars.

Can I simulate one of these boards using the TPS631000DRLR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part