10 open source boards using the MCP73831T-2ACI/MC

Real designs built with the MCP73831T-2ACI/MC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the MCP73831T-2ACI/MC

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP73831T-2ACI/MC connects to, and the resistors, capacitors and other passives placed on it.

  • The PROG pin has a resistor to GND on 7 of 7 designs, most often 2 kΩ (then 10 kΩ).
  • The VBAT pins have a decoupling capacitor on 6 of 7 designs, most often 4.7 µF (then 10 µF).
  • The VDD_1 pin has a decoupling capacitor on 5 of 7 designs, most often 4.7 µF (then 10 µF).
  • The VDD_2 pin has a decoupling capacitor on 5 of 7 designs, most often 4.7 µF (then 10 µF).
VDD_1pin 1Connected to: VBUS 86%
  • Decoupling capacitor on 71% · 4.7 µF (4), 10 µF (1)
VDD_2pin 2Connected to: VBUS 86%
  • Decoupling capacitor on 71% · 4.7 µF (4), 10 µF (1)
VBATpin 3, 4Connected to: VBAT 57% · a signal 43%
  • Decoupling capacitor on 86% · 4.7 µF (9), 10 µF (2)
VSSpin 6Connected to: GND 86%
NCpin 7Connected to: Not connected 100%
PROGpin 8Connected to: Signal 100%
  • Resistor to GND on 100% · 2 kΩ (3), 10 kΩ (2), 2.2 kΩ (1)
GNDpin 9Connected to: GND 83% · not connected 17%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Muscleboardv0 by gskelly, Audiotest by aherbez, Game2 by aherbez and Ambient air by mawoka-myblock.

The MCP73831T-2ACI/MC in open source designs

The gallery holds 10 open source boards using the MCP73831T-2ACI/MC from 7 GitHub repositories; a typical one measures about 50 × 35.8 mm and carries around 56 components.

56% use four copper layers or more, and 0% carry an open source license.

The most starred is Muscleboardv0 by gskelly.

Microcontrollers on boards using the MCP73831T-2ACI/MC

MCP73831T-2ACI/MC: common questions

Where can I find a MCP73831T-2ACI/MC reference design?

Each of the 10 boards on this page is a real design using the MCP73831T-2ACI/MC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP73831T-2ACI/MC PROG pin?

The PROG pin has a resistor to GND on 7 of 7 designs, most often 2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the MCP73831T-2ACI/MC.

What decoupling capacitors do designs use on the MCP73831T-2ACI/MC VBAT pin?

The VBAT pins have a decoupling capacitor on 6 of 7 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the MCP73831T-2ACI/MC.

What decoupling capacitors do designs use on the MCP73831T-2ACI/MC VDD_1 pin?

The VDD_1 pin has a decoupling capacitor on 5 of 7 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the MCP73831T-2ACI/MC.

What parts are used alongside the MCP73831T-2ACI/MC?

The BQ27441DRZT-G1A, ER-TFT023-1, ESP32-PICO-D4, FT231XQ-R and MAX98357AEWL+T appear in the most repositories here.

Which microcontrollers do boards using the MCP73831T-2ACI/MC use?

Most are built on ESP32 (5), RP2040/RP2350 (2), AVR/Arduino (1) and STM32 (1).

How big is a typical board using the MCP73831T-2ACI/MC?

The median is 50 × 35.8 mm, and 44% are two-layer designs.

What is the most popular open source board using the MCP73831T-2ACI/MC?

By GitHub stars, Muscleboardv0 by gskelly, with 21 stars.

Can I simulate one of these boards using the MCP73831T-2ACI/MC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part