Custom-STM32-PCB-With
mohamedboubaker·Custom-STM32-PCB-With-KiCad
About the Custom-STM32-PCB-With
Custom-STM32-PCB-With is an open source STM32 PCB design by mohamedboubaker, published on GitHub. It is a 2-layer board measuring 52 × 52 mm, with 37 components from 26 distinct parts.
Its main chip is the STM32F030C8TX, from the STM32 family. Other key parts include the 4U7, 100N, 8MHZ, 30P and 10P. By type, the board carries 15 ICs, 11 resistors, 4 diodes, 3 connectors, 2 switches and 1 inductor.
From the project
Custom STM32F030 PCB designed with KiCad and ordered from JLCPCB

Main components on the Custom-STM32-PCB-With
Custom-STM32-PCB-With bill of materials (BOM)
37 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4U7 4u7 | C_0603_1608Metric | U1 |
| 6 | 100N 100n | C_0402_1005Metric | U2, U3, U4, U5, U6, U12 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | U7 |
| 2 | 30P 30p | C_0402_1005Metric | U8, U9 |
| 1 | STM32F030C8TX STM32F030C8Tx | LQFP-48_7x7mm_P0.5mm | U10 |
| 1 | 10P 10p | C_0402_1005Metric | U11 |
| 1 | 10N 10n | C_0805_2012Metric | U13 |
| 1 | TPS5430DDA | TI_SO-PowerPAD-8_ThermalVias | U14 |
| 1 | 10U 10u | C_0805_2012Metric | U15 |
| 2 | Communication pins | PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | 5V-20V | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 2 | SW_Push | SW_Push_1P1T_NO_CK_KSC6xxJ | SW1, SW2 |
| 1 | LED1 | LED_0603_1608Metric | D1 |
| 1 | LED2 | LED_0603_1608Metric | D2 |
| 1 | B340 | D_SMA | D3 |
| 1 | C2286 PWR Status | LED_0603_1608Metric | D4 |
| 1 | 15UH 15uH | L_10.4x10.4_H4.8 | L1 |
| 1 | 220U 220u | CP_EIA-7343-15_Kemet-W | C1 |
| 3 | 1K5 1k5 | R_0603_1608Metric | R1, R2, R8 |
| 1 | 10K | R_0402_1005Metric | R3 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2K2 2k2 | R_0402_1005Metric | R4, R5 |
| 1 | 1K | R_0603_1608Metric | R6 |
| 1 | 100K | R_0603_1608Metric | R7 |
| 1 | 8K2 8k2 | R_0805_2012Metric | R9 |
| 1 | 1K5 1k5 | R_0805_2012Metric | R10 |
| 1 | 2K7 2k7 | R_0805_2012Metric | R11 |
Custom-STM32-PCB-With design files
The KiCad project lives in the mohamedboubaker/Custom-STM32-PCB-With-KiCad repository on GitHub; these links point at the commit this page was built from.
- Layoutmcudev.kicad_pcb
- Schematicmcudev.kicad_sch
- BOMAssembly Files for JLCPCB/BOM-mcudev.csv
Custom-STM32-PCB-With: common questions
What microcontroller does the Custom-STM32-PCB-With use?
The Custom-STM32-PCB-With is built around the STM32F030C8TX, from the STM32 family.
How big is the Custom-STM32-PCB-With?
The Custom-STM32-PCB-With measures 52 × 52 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Custom-STM32-PCB-With?
37 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Custom-STM32-PCB-With design files?
From the mohamedboubaker/Custom-STM32-PCB-With-KiCad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Custom-STM32-PCB-With design in my own project?
The repository has no license, so all rights stay with mohamedboubaker. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Custom-STM32-PCB-With without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k