5 open source boards using the 10N

Real designs built with the 10N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 10N

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 10N connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 2 has a inductor on 5 of 5 designs, most often 15 µH.
Pin 2Connected to: TPS5430DDA 100%
  • Inductor on 100% · 15 µH (5)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GPS-Tracker by mohamedboubaker, GPS-Tracker by ibfarhat, Custom-STM32-PCB-With-KiCad by mohamedboubaker and Custom-STM32-Kicad by dhnz-2006.

The 10N in open source designs

The gallery holds 5 open source boards using the 10N from 5 GitHub repositories; a typical one measures about 35 × 53 mm and carries around 53 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is GPS-Tracker by mohamedboubaker.

Microcontrollers on boards using the 10N

What boards using the 10N are built for

10N: common questions

Where can I find a 10N reference design?

Each of the 5 boards on this page is a real design using the 10N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 10N pin 2 connected?

Pin 2 has a inductor on 5 of 5 designs, most often 15 µH. Counted from the KiCad layouts of 5 open source designs using the 10N.

What parts are used alongside the 10N?

The 100N, 10P, 10U, 30P and 4U7 appear in the most repositories here.

Which microcontrollers do boards using the 10N use?

Most are built on STM32 (5).

How big is a typical board using the 10N?

The median is 35 × 53 mm, and 100% are two-layer designs.

What is the most popular open source board using the 10N?

By GitHub stars, GPS-Tracker by mohamedboubaker, with 40 stars.

Can I simulate one of these boards using the 10N before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part