5 open source boards using the 10U
Real designs built with the 10U, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
GPS-Tracker
mohamedboubaker
35 × 53 mm53 parts2LNo license40STM32
GPS-Tracker
ibfarhat
35 × 53 mm53 parts2LNo license3STM32
Custom-STM32-PCB-With
mohamedboubaker
52 × 52 mm37 parts2LNo license2STM32
GPS-Tracker
HarshBihani18
35 × 53 mm53 parts2LNo license0STM32
Custom-STM32
dhnz-2006
52 × 52 mm37 parts2LNo license0
How designs wire the 10U
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 10U connects to, and the resistors, capacitors and other passives placed on it.
- Pin 2 is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GPS-Tracker by mohamedboubaker, GPS-Tracker by ibfarhat, Custom-STM32-PCB-With-KiCad by mohamedboubaker and Custom-STM32-Kicad by dhnz-2006.
The 10U in open source designs
The gallery holds 5 open source boards using the 10U from 5 GitHub repositories; a typical one measures about 35 × 53 mm and carries around 53 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is GPS-Tracker by mohamedboubaker.
Microcontrollers on boards using the 10U
What boards using the 10U are built for
10U: common questions
Where can I find a 10U reference design?
Each of the 5 boards on this page is a real design using the 10U. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 10U pin 2 connected?
Pin 2 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 10U.
What parts are used alongside the 10U?
The 100N, 10N, 10P, 30P and 4U7 appear in the most repositories here.
Which microcontrollers do boards using the 10U use?
Most are built on STM32 (5).
How big is a typical board using the 10U?
The median is 35 × 53 mm, and 100% are two-layer designs.
What is the most popular open source board using the 10U?
By GitHub stars, GPS-Tracker by mohamedboubaker, with 40 stars.
Can I simulate one of these boards using the 10U before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.