HardLabs

52

mohit716·esp32-c3-usbc-tft-controller·iterations/52.kicad_pcb

52 PCB layout, top view — open source ESP32 board by mohit716

About the 52 PCB

52 is an open source ESP32 PCB design by mohit716, published on GitHub. It is a 2-layer board measuring 71.5 × 51.5 mm, with 17 components from 13 distinct parts.

Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the USBLC6-2P6 and AMS1117-3.3. By type, the board carries 5 resistors, 4 capacitors, 3 ICs, 2 connectors, 2 switches and 1 diode.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

An open-hardware controller board built around the ESP32-C3-MINI-1 module, designed to power and drive an external TFT display over a simple pin header. The board is USB-C powered and programmable, with onboard 3.3 V regulation, USB data-line ESD protection, an addressable RGB st

An open-hardware controller board built around the ESP32-C3-MINI-1 module, designed to power and drive an external TFT display over a simple pin header. The board is USB-C powered and programmable, with onboard 3.3 V regulation, USB data-line ESD protection, an addressable RGB status LED, and a tactile button. Designed in KiCad 9.

- MCU: ESP32-C3-MINI-1-N4 (RISC-V, Wi-Fi + Bluetooth LE, 4 MB flash) - USB-C: GCT USB4120-03-C Type-C connector for power and USB data - ESD protection: USBLC6-2P6 on the USB data lines - Power: AMS1117-3.3 LDO regulator (SOT-223) providing the 3.3 V rail - Status…

52, from the project README
From the project README

Main components on the 52

ESP32-C3-MINI-1-N4USBLC6-2P6AMS1117-3.3

52 bill of materials (BOM)

17 components, 13 distinct parts.

QtyPartRefs
1
ESP32-C3-MINI-1-N4
U1
1
USBLC6-2P6
U2
1
AMS1117-3.3
U3
1
USB4120-03-C_REVA6
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
WS2812B
D1
1
10uF
C1
1
22uF
C2
2
0.1uF
C3, C4
2
5.1k
R1, R2
2
10k
R3, R4
1
330
R5

52 design files

The KiCad project lives in the mohit716/esp32-c3-usbc-tft-controller repository on GitHub; these links point at the commit this page was built from.

52: common questions

What microcontroller does the 52 use?

The 52 is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.

How big is the 52 PCB?

The 52 measures 71.5 × 51.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 52?

17 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the 52 design files?

From the mohit716/esp32-c3-usbc-tft-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 52 design in my own project?

The repository has no license, so all rights stay with mohit716. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 52 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esp32-c3-usbc-tft-controller

Similar boards