HardLabs

59

mohit716·esp32-c3-usbc-tft-controller·iterations/59.kicad_pcb

59 PCB layout, top view — open source ESP32 board by mohit716

About the 59 PCB

59 is an open source ESP32 PCB design by mohit716, published on GitHub. It is a 2-layer board measuring 75.5 × 51 mm, with 17 components from 13 distinct parts.

Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. Other key parts include the USBLC6-2P6 and AMS1117-3.3. By type, the board carries 5 resistors, 4 capacitors, 3 ICs, 2 connectors, 2 switches and 1 diode.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

An open-hardware controller board built around the ESP32-C3-MINI-1 module, designed to power and drive an external TFT display over a simple pin header. The board is USB-C powered and programmable, with onboard 3.3 V regulation, USB data-line ESD protection, an addressable RGB st

An open-hardware controller board built around the ESP32-C3-MINI-1 module, designed to power and drive an external TFT display over a simple pin header. The board is USB-C powered and programmable, with onboard 3.3 V regulation, USB data-line ESD protection, an addressable RGB status LED, and a tactile button. Designed in KiCad 9.

- MCU: ESP32-C3-MINI-1-N4 (RISC-V, Wi-Fi + Bluetooth LE, 4 MB flash) - USB-C: GCT USB4120-03-C Type-C connector for power and USB data - ESD protection: USBLC6-2P6 on the USB data lines - Power: AMS1117-3.3 LDO regulator (SOT-223) providing the 3.3 V rail - Status…

59, from the project README
From the project README

Main components on the 59

ESP32-C3-MINI-1-N4USBLC6-2P6AMS1117-3.3

59 bill of materials (BOM)

17 components, 13 distinct parts.

QtyPartRefs
1
ESP32-C3-MINI-1-N4
U1
1
USBLC6-2P6
U2
1
AMS1117-3.3
U3
1
USB4120-03-C_REVA6
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
WS2812B
D1
1
10uF
C1
1
22uF
C2
2
0.1uF
C3, C4
2
5.1k
R1, R2
2
10k
R3, R4
1
330
R5

59 design files

The KiCad project lives in the mohit716/esp32-c3-usbc-tft-controller repository on GitHub; these links point at the commit this page was built from.

59: common questions

What microcontroller does the 59 use?

The 59 is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.

How big is the 59 PCB?

The 59 measures 75.5 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 59?

17 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the 59 design files?

From the mohit716/esp32-c3-usbc-tft-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 59 design in my own project?

The repository has no license, so all rights stay with mohit716. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 59 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esp32-c3-usbc-tft-controller

Similar boards