Psu board
About the Psu board
Psu board is an open source PCB design by MUNAKATA-EPC, published on GitHub. It is a 2-layer board measuring 57.9 × 45 mm, with 20 components from 12 distinct parts.
Other key parts include the OKL-T_6-W12N-C. By type, the board carries 6 capacitors, 3 connectors, 3 resistors, 2 switches, 1 IC and 1 battery holder.
From the project
アルテミス2023シーズンのリポジトリです。詳しくはwikiで。
このReadmeでは軽く自チームの紹介がてら結果報告やロボット概要をまとめておきます。 詳しくはいつか出る全国大会の記事で。
Main components on the Psu board
Psu board bill of materials (BOM)
20 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OKL-T_6-W12N-C | DCDC-murata-6A | U1 |
| 3 | Conn_01x02_Female | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J2, J3 |
| 1 | Battery | JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | BT1 |
| 1 | Fuse | fuse_socket | F1 |
| 1 | Voltmeter_DC | voltage_counter | MES1 |
| 1 | R_Potentiometer_Trim_US | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | SW_DIP_x01 | 2MS1T2B4M2QES | SW1 |
| 1 | SW_DIP_x01 | DS-850k | SW2 |
| 1 | D_Shockley | D_5W_P10.16mm_Horizontal | D1 |
| 3 | C | C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C3, C6 |
| 3 | C | CP_Radial_D5.0mm_P2.50mm | C2, C4, C5 |
| 3 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
Psu board design files
The KiCad project lives in the MUNAKATA-EPC/Artemis_2023 repository on GitHub; these links point at the commit this page was built from.
Psu board: common questions
How big is the Psu board?
The Psu board measures 57.9 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Psu board?
20 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Psu board design files?
From the MUNAKATA-EPC/Artemis_2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Psu board design in my own project?
The repository has no license, so all rights stay with MUNAKATA-EPC. Use it as a reference, and ask the author before reusing the design.
More boards in Artemis_2023
AVR/ArduinoMainboard
120 × 120 mm151 parts2LNo license2
AVR/ArduinoMain board Teensy
120 × 120 mm110 parts2LNo license2
PICMain board
109.9 × 109.9 mm75 parts2LNo license2
Line sensor
100 × 108 mm49 parts2LNo license2
TJ3B
44 parts2LNo license2
AVR/ArduinoIO Board
85.4 × 76 mm32 parts2LNo license2
Line sensor front
90 × 30.9 mm22 parts2LNo license2
AT
15 × 20 mm15 parts2LNo license2
LSM6DS3 Gyro
9.4 × 11.2 mm9 parts2LNo license2
ジャイロ
33.2 × 40 mm7 parts2LNo license2
NXPTeensy4 header breakout
22.9 × 35.6 mm3 parts2LNo license2