HardLabs

LSM6DS3 Gyro

MUNAKATA-EPC·Artemis_2023·KiCad_Projects/その他/LSM6DS3_Gyro/LSM6DS3_Gyro.kicad_pcb

LSM6DS3 Gyro PCB layout, top view — open source board by MUNAKATA-EPC

About the LSM6DS3 Gyro PCB

LSM6DS3 Gyro is an open source PCB design by MUNAKATA-EPC, published on GitHub. It is a 2-layer board measuring 9.4 × 11.2 mm, with 9 components from 5 distinct parts.

Other key parts include the LSM6DS3 and NCP563. By type, the board carries 4 capacitors, 2 ICs, 2 resistors and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

アルテミス2023シーズンのリポジトリです。詳しくはwikiで。

このReadmeでは軽く自チームの紹介がてら結果報告やロボット概要をまとめておきます。 詳しくはいつか出る全国大会の記事で。

Main components on the LSM6DS3 Gyro

LSM6DS3NCP563

LSM6DS3 Gyro bill of materials (BOM)

9 components, 5 distinct parts.

QtyPartRefs
1
LSM6DS3
U1
1
NCP563
U2
1
Conn_01x04_Female
J1
4
C_Small
C1, C2, C3, C4
2
R
R1, R2

LSM6DS3 Gyro design files

The KiCad project lives in the MUNAKATA-EPC/Artemis_2023 repository on GitHub; these links point at the commit this page was built from.

LSM6DS3 Gyro: common questions

How big is the LSM6DS3 Gyro PCB?

The LSM6DS3 Gyro measures 9.4 × 11.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LSM6DS3 Gyro?

9 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the LSM6DS3 Gyro design files?

From the MUNAKATA-EPC/Artemis_2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LSM6DS3 Gyro design in my own project?

The repository has no license, so all rights stay with MUNAKATA-EPC. Use it as a reference, and ask the author before reusing the design.

More boards in Artemis_2023

Similar boards