11 open source boards using the OKL-T/6-W12N-C

Real designs built with the OKL-T/6-W12N-C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the OKL-T/6-W12N-C

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the OKL-T/6-W12N-C connects to, and the resistors, capacitors and other passives placed on it.

  • The SEQ pin is left unconnected on 9 of 9 designs.
  • The SENSE pin is tied to 5V on 8 of 9 designs.
  • The PGOOD pin is left unconnected on 8 of 9 designs.
  • The VIN pin has a decoupling capacitor on 6 of 10 designs, most often 22 µF.
ON/OFFpin 1Connected to: GND 60% · a signal 30%
VINpin 2Connected to: BATT 70% · GND 20%
  • Decoupling capacitor on 60% · 22 µF (2)
GNDpin 3, 7Connected to: GND 95%
VOUTpin 4Connected to: 5V 80%
  • Decoupling capacitor on 60% · 10 µF (2), 1 µF (1)
SENSEpin 5Connected to: 5V 89%
TRIMpin 6Connected to: Signal 100%
  • Series resistor on 56% · 1 kΩ (2)
NCpin 8, 11, 12Connected to: Not connected 100%
SEQpin 9Connected to: Not connected 100%
PGOODpin 10Connected to: Not connected 89%
Pin 13Connected to: Not connected 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Imu by komori-t, Integrated Power Board by MUNAKATA-EPC, Main board by elkel53930 and Main board by elkel53930.

The OKL-T/6-W12N-C in open source designs

The gallery holds 11 open source boards using the OKL-T/6-W12N-C from 10 GitHub repositories; a typical one measures about 80 × 75.9 mm and carries around 94 components.

82% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is Imu by komori-t.

Microcontrollers on boards using the OKL-T/6-W12N-C

What boards using the OKL-T/6-W12N-C are built for

OKL-T/6-W12N-C: common questions

Where can I find a OKL-T/6-W12N-C reference design?

Each of the 11 boards on this page is a real design using the OKL-T/6-W12N-C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the OKL-T/6-W12N-C SEQ pin connected?

The SEQ pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 10 open source designs using the OKL-T/6-W12N-C.

How is the OKL-T/6-W12N-C SENSE pin connected?

The SENSE pin is tied to 5V on 8 of 9 designs. Counted from the KiCad layouts of 10 open source designs using the OKL-T/6-W12N-C.

How is the OKL-T/6-W12N-C PGOOD pin connected?

The PGOOD pin is left unconnected on 8 of 9 designs. Counted from the KiCad layouts of 10 open source designs using the OKL-T/6-W12N-C.

What parts are used alongside the OKL-T/6-W12N-C?

The BD63573NUV, FT231XQ-R, LM74700QDBVRQ1, LSM6DSR and MCP73213T-A6SI/MF appear in the most repositories here.

Which microcontrollers do boards using the OKL-T/6-W12N-C use?

Most are built on ESP32 (4) and AVR/Arduino (3).

How big is a typical board using the OKL-T/6-W12N-C?

The median is 80 × 75.9 mm, and 82% are two-layer designs.

What is the most popular open source board using the OKL-T/6-W12N-C?

By GitHub stars, Imu by komori-t, with 8 stars.

Can I simulate one of these boards using the OKL-T/6-W12N-C before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part