HardLabs

Line sensor front

MUNAKATA-EPC·Artemis_2023·KiCad_Projects/2022 late/Teensy_ver/line_sensor_front/line_sensor_front.kicad_pcb

Line sensor front PCB layout, top view — open source board by MUNAKATA-EPC

About the Line sensor front PCB

Line sensor front is an open source PCB design by MUNAKATA-EPC, published on GitHub. It is a 2-layer board measuring 90 × 30.9 mm, with 22 components from 4 distinct parts.

Other key parts include the Line_sennsor. By type, the board carries 7 ICs, 7 diodes, 7 capacitors and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

アルテミス2023シーズンのリポジトリです。詳しくはwikiで。

このReadmeでは軽く自チームの紹介がてら結果報告やロボット概要をまとめておきます。 詳しくはいつか出る全国大会の記事で。

Main components on the Line sensor front

Line_sennsor

Line sensor front bill of materials (BOM)

22 components, 4 distinct parts.

QtyPartRefs
7
Line_sennsor
U1, U2, U3, U4, U5, U6, U7
1
Conn_01x04_Female
J1
7
LED
D1, D2, D3, D4, D5, D6, D7
7
C_Small
C1, C2, C3, C4, C5, C6, C7

Line sensor front design files

The KiCad project lives in the MUNAKATA-EPC/Artemis_2023 repository on GitHub; these links point at the commit this page was built from.

Line sensor front: common questions

How big is the Line sensor front PCB?

The Line sensor front measures 90 × 30.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Line sensor front?

22 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Line sensor front design files?

From the MUNAKATA-EPC/Artemis_2023 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Line sensor front design in my own project?

The repository has no license, so all rights stay with MUNAKATA-EPC. Use it as a reference, and ask the author before reusing the design.

More boards in Artemis_2023

Similar boards