ESP32DUALDIAL

nanbuwks·Esp32DualDialSsr·KiCad/ESP32DUALDIAL.kicad_pcb

ESP32DUALDIAL PCB layout, top view — open source ESP32 board by nanbuwks

About the ESP32DUALDIAL PCB

ESP32DUALDIAL is an open source ESP32 PCB design by nanbuwks, published on GitHub under the Custom license license. It is a 2-layer board measuring 180.5 × 74 mm, with 67 components from 32 distinct parts.

Its main chip is the ESP-WROOM-32-NANBUWKS, from the ESP32 family. Other key parts include the CR2013-MI2120, DHT11, S108T02, TBD62783A and ROAM BP5293-33. By type, the board carries 21 resistors, 19 capacitors, 9 ICs, 7 connectors, 2 modules and 2 jumpers.

From the project

ESP32 board with 2 rotary encoder and 4 ch SSR.

ESP32 board with 2 rotary encoder and 4 ch SSR.

include AC to 12V DC power module and AC (SSR driven 12V).

2 output but 1ch 12V ON/OFF output for 12V FAN.

Power IN connector (J2) , fuse (F1) and one of SSR output (J5)

ESP32DUALDIAL, from the project README
From the project README

Main components on the ESP32DUALDIAL

CR2013-MI2120ESP-WROOM-32-NANBUWKSDHT11S108T02TBD62783AROAM BP5293-33

ESP32DUALDIAL bill of materials (BOM)

67 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CR2013-MI2120
U1
1
ESP-WROOM-32-NANBUWKS
ESP-WROOM-32
U2
1
DHT11
U4
4
S108T02
U5, U6, U7, U8
1
TBD62783A
U9
1
ROAM BP5293-33
U10
2
FAN_CPU_4PIN
Fan_CPU_4pin
M1, M2
1
Q_NMOS_GDS
Q1
1
SERVICE
J1
1
CONN_01X04_MALE
Conn_01x04_Male
J2
1
mode
J3
1
CONN_01X03_MALE
Conn_01x03_Male
J5
3
CONN_01X02_MALE
Conn_01x02_Male
J6, J7, J8
1
BUZZER1
Buzzer
BZ1
1
Fuse
F1
2
Jumper_NC_Dual
JP2, JP3
1
IRM-15-12
IRM-20-12
PS1
2
Rotary_Encoder_Switch
SW1, SW2
1
D_Schottky
D1
8
0.1uF
C1, C2, C4, C5, C7, C8, C9, C12
Show 12 more
QtyPartRefs
3
10u
C3, C10, C11
1
20p
C6
2
1000p
C13, C14
3
0.1uF
C15, C16, C17
1
22uF
C18
1
220uF
C19
1
103
R1
6
10k
R2, R3, R17, R18, R20, R22
10
270
R5, R6, R7, R8, R11, R12, R13, R14 +2
1
1k
R9
1
100k
R10
2
1MΩ
R23, R24

ESP32DUALDIAL design files

The KiCad project lives in the nanbuwks/Esp32DualDialSsr repository on GitHub; these links point at the commit this page was built from.

ESP32DUALDIAL: common questions

What microcontroller does the ESP32DUALDIAL use?

The ESP32DUALDIAL is built around the ESP-WROOM-32-NANBUWKS, from the ESP32 family.

How big is the ESP32DUALDIAL PCB?

The ESP32DUALDIAL measures 180.5 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32DUALDIAL?

67 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32DUALDIAL design files?

From the nanbuwks/Esp32DualDialSsr repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32DUALDIAL design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the ESP32DUALDIAL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Esp32DualDialSsr

Similar boards