ESP32DUALDIAL-shield
nanbuwks·Esp32DualDialSsr·KiCad/ESP32DUALDIAL-shield.kicad_pcb
About the ESP32DUALDIAL-shield
ESP32DUALDIAL-shield is an open source ESP32 PCB design by nanbuwks, published on GitHub under the Custom license license. It is a 2-layer board measuring 180.5 × 74 mm, with 46 components from 27 distinct parts.
Its main chip is the ESP-WROOM-32-NANBUWKS, from the ESP32 family. Other key parts include the CR2013-MI2120, DHT11, S108T02 and TBD62783A. By type, the board carries 12 capacitors, 10 resistors, 9 ICs, 8 connectors, 2 switches and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
ESP32 board with 2 rotary encoder and 4 ch SSR.
ESP32 board with 2 rotary encoder and 4 ch SSR.
include AC to 12V DC power module and AC (SSR driven 12V).
2 output but 1ch 12V ON/OFF output for 12V FAN.
Power IN connector (J2) , fuse (F1) and one of SSR output (J5)

Main components on the ESP32DUALDIAL-shield
ESP32DUALDIAL-shield bill of materials (BOM)
46 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CR2013-MI2120 | TFT3.2_ILI9341 | U1 |
| 1 | ESP-WROOM-32-NANBUWKS ESP-WROOM-32 | ESP-WROOM-32 | U2 |
| 1 | QS-1205CME-3A_MINIDC-DC_12-24Vto5V3A_1.8V_2.5V_3.3V_5V_9V_12V | QS-1205CME-3A_MINIDC-DC_12-24Vto5V3A_1.8V_2.5V_3.3V_5V_9V_12V | U3 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U4 |
| 4 | S108T02 | SSR_SHARP_S108T02 | U5, U6, U7, U8 |
| 1 | TBD62783A | DIP-18_W7.62mm | U9 |
| 1 | Q_NMOS_GDS | TO-220-3_Vertical | Q1 |
| 1 | SERVICE | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | CONN_01X04_MALE Conn_01x04_Male | JST_NV_B04P-NV_1x04_P5.00mm_Vertical | J2 |
| 2 | FAN | PinSocket_1x02_P2.54mm_Vertical | J3, J4 |
| 1 | CONN_01X03_MALE Conn_01x03_Male | JST_VH_B3P-VH_1x03_P3.96mm_Vertical | J5 |
| 3 | CONN_01X02_MALE Conn_01x02_Male | JST_NV_B02P-NV_1x02_P5.00mm_Vertical | J6, J7, J8 |
| 1 | BUZZER1 Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Fuse | 20mmFuse_P5x2 | F1 |
| 1 | IRM-15-12 IRM-20-12 | Converter_ACDC_MeanWell_IRM-20-xx_THT | PS1 |
| 2 | Rotary_Encoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2 |
| 1 | D_Schottky | D_SOD-123F | D1 |
| 8 | 0.1uF | R_0603_1608Metric | C1, C2, C4, C5, C7, C8, C9, C12 |
| 3 | 10u | C_0402_1005Metric | C3, C10, C11 |
| 1 | 20p | C_0402_1005Metric | C6 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 103 | R_0603_1608Metric | R1 |
| 1 | 10k | R_0603_1608Metric | R2 |
| 1 | 4.7k | R_0603_1608Metric | R3 |
| 1 | NC | R_0603_1608Metric | R4 |
| 4 | 330 | R_0603_1608Metric | R5, R6, R7, R8 |
| 1 | 1k | R_0603_1608Metric | R9 |
| 1 | 100k | R_0603_1608Metric | R10 |
ESP32DUALDIAL-shield design files
The KiCad project lives in the nanbuwks/Esp32DualDialSsr repository on GitHub; these links point at the commit this page was built from.
ESP32DUALDIAL-shield: common questions
What microcontroller does the ESP32DUALDIAL-shield use?
The ESP32DUALDIAL-shield is built around the ESP-WROOM-32-NANBUWKS, from the ESP32 family.
How big is the ESP32DUALDIAL-shield?
The ESP32DUALDIAL-shield measures 180.5 × 74 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32DUALDIAL-shield?
46 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32DUALDIAL-shield design files?
From the nanbuwks/Esp32DualDialSsr repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ESP32DUALDIAL-shield design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the ESP32DUALDIAL-shield without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Esp32DualDialSsr
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k