16 open source boards using the TBD62783A
Real designs built with the TBD62783A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
VFD Watch
Pakue95
67.8 × 55 mm59 parts2LNo license41ESP32
Flipdot brose
julianschick
100 × 100 mm43 parts2LMIT4ESP32
HPA300-hardware
patmont
245 × 51 mm61 parts2LCERN-OHL-W-2.01MHCNC
TheHexaCube
195 × 123 mm408 parts4LNo license0RP2040/RP2350
E1041
Electro707
116 × 90 mm137 parts2LGPL-3.00Mgc
0x007E
92.7 × 62.2 mm108 parts2LCC-BY-NC-4.00Nucleo-F767-Base-Board
Entruer
120 × 130 mm76 parts2LNo license0ESP32
ESP32DUALDIAL
nanbuwks
180.5 × 74 mm67 parts2LCustom license0STM32 seminaer
SHIGEMAL
177 × 106 mm40 parts2LNo license0Bob
rene-dev
100 × 100 mm140 parts2LGPL-3.0979Bob
emdotnet
100 × 100 mm140 parts2LGPL-3.00ESP32
ESP32DUALDIAL-shield
nanbuwks
180.5 × 74 mm46 parts2LCustom license0GPIOExpansion
ja1umi
155 × 114 mm33 parts2LMIT10BF-005
botanicfields
96.5 × 91.4 mm31 parts2LCC0-1.02ESP32
OpenChess - Controller Board
PaoloJN
58 × 71 mm25 parts2LNo license0AVR/Arduino
PistonEncoder
stefanhepp
150 × 100 mm28 parts2LCC-BY-SA-4.00
How designs wire the TBD62783A
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the TBD62783A connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 15 designs, most often 100 nF (then 47 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 9 | Connected to: 5V 67% · a signal 33% |
|
| GNDpin 10 | Connected to: GND 100% | — |
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bob by rene-dev, VFD Watch by Pakue95, GPIOExpansion by ja1umi and Flipdot brose by julianschick.
The TBD62783A in open source designs
The gallery holds 16 open source boards using the TBD62783A from 15 GitHub repositories; a typical one measures about 118 × 95.7 mm and carries around 60 components.
94% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Bob by rene-dev.
Parts used alongside the TBD62783A
Microcontrollers on boards using the TBD62783A
What boards using the TBD62783A are built for
TBD62783A: common questions
Where can I find a TBD62783A reference design?
Each of the 16 boards on this page is a real design using the TBD62783A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TBD62783A VCC pin?
The VCC pin has a decoupling capacitor on 7 of 15 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 15 open source designs using the TBD62783A.
What parts are used alongside the TBD62783A?
The 74HC595, ADM4857, ULN2803A, ULN2803ADWR and USBLC6-4SC6 appear in the most repositories here.
Which microcontrollers do boards using the TBD62783A use?
Most are built on ESP32 (6), AVR/Arduino (1) and RP2040/RP2350 (1).
How big is a typical board using the TBD62783A?
The median is 118 × 95.7 mm, and 94% are two-layer designs.
What is the most popular open source board using the TBD62783A?
By GitHub stars, Bob by rene-dev, with 979 stars.
Can I simulate one of these boards using the TBD62783A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.