HardLabs

Pineappley-Devboard-V1

nathans-systems·Pineappley-Devboard-V1·PCB/devboard.kicad_pcb

Pineappley-Devboard-V1 PCB layout, top view — open source ESP32 board by nathans-systems

About the Pineappley-Devboard-V1 PCB

Pineappley-Devboard-V1 is an open source ESP32 PCB design by nathans-systems, published on GitHub. It is a 2-layer board measuring 42.4 × 64.6 mm, with 24 components from 17 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3 and ER_OLEDM0.91_1x-I2C. By type, the board carries 8 capacitors, 5 resistors, 4 connectors, 3 ICs, 2 switches and 2 diodes.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

Custom designed ESP32-S3-WROOM devboard with onboard OLED.

Ensure the Pineappley Devboard is in bootloader mode. Do this by powering up the board then holding the BOOT button (rightmost), pressing the RESET (leftmost) button once then releasing the BOOT Button.

```ini [env:esp32-s3-devkitc-1] platform = espressif32 board = esp32-s3-devkitc-1 framework = arduino

buildflags = -DARDUINOUSBMODE=1 -DARDUINOUSBCDCONBOOT=1 -DBOARDHAS_PSRAM

Pineappley-Devboard-V1, from the project README
From the project README

Main components on the Pineappley-Devboard-V1

ESP32-S3-WROOM-1AMS1117-3.3ER_OLEDM0.91_1x-I2C

Pineappley-Devboard-V1 bill of materials (BOM)

24 components, 17 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1
1
AMS1117-3.3
U2
1
ER_OLEDM0.91_1x-I2C
U3
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x15
J2
1
Conn_01x13
J3
1
Conn_01x06
J4
1
Boot_Opt
SW1
1
RST
SW2
2
LED
D1, D2
2
10uF
C1, C3
4
0.1uF
C2, C4, C6, C8
1
22uF
C5
1
1uF
C7
2
5K1
R1, R2
1
10K
R3
2
1k
R4, R5

Pineappley-Devboard-V1 design files

The KiCad project lives in the nathans-systems/Pineappley-Devboard-V1 repository on GitHub; these links point at the commit this page was built from.

Pineappley-Devboard-V1: common questions

What microcontroller does the Pineappley-Devboard-V1 use?

The Pineappley-Devboard-V1 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Pineappley-Devboard-V1 PCB?

The Pineappley-Devboard-V1 measures 42.4 × 64.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pineappley-Devboard-V1?

24 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pineappley-Devboard-V1 design files?

From the nathans-systems/Pineappley-Devboard-V1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pineappley-Devboard-V1 design in my own project?

The repository has no license, so all rights stay with nathans-systems. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pineappley-Devboard-V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards