Pipernigrum iot

naufalyafisusanto·pipernigrum-iot·pcb/pipernigrum.kicad_pcb

Pipernigrum iot PCB layout, top view — open source ESP32 board by naufalyafisusanto

About the Pipernigrum iot PCB

Pipernigrum iot is an open source ESP32 PCB design by naufalyafisusanto, published on GitHub. It is a 2-layer board measuring 140.3 × 84.9 mm, with 28 components from 21 distinct parts.

Its main chip is the ESP32-DEVKITC-32U, from the ESP32 family. Other key parts include the DS18B20, HTU21D, PZEM-004t, Driver Stepper and HX711 Module 4. By type, the board carries 17 ICs, 9 resistors, 1 module and 1 fuse.

It belongs with the iot & wireless, sensors and robotics & motion designs in this gallery.

From the project

An innovative Internet of Things (IoT) solution for black pepper (Piper nigrum L.) processing that utilizes electric heating elements for faster and more hygienic drying compared to conventional sun-drying methods. The system features ESP32 and Arduino Nano microcontrollers that

An innovative Internet of Things (IoT) solution for black pepper (Piper nigrum L.) processing that utilizes electric heating elements for faster and more hygienic drying compared to conventional sun-drying methods. The system features ESP32 and Arduino Nano microcontrollers that enable real-time monitoring and precise control of the entire drying process, ensuring consistent quality and efficiency. The solution integrates with an enterprise-grade Linux Armbian server for robust data storage, advanced analytics, and secure remote management capabilities, creating a complete end-to-end system…

Pipernigrum iot, from the project README
From the project README

Main components on the Pipernigrum iot

ESP32-DEVKITC-32UDS18B20HTU21DPZEM-004tDriver StepperHX711 Module 4HX711 Module 3HX711 Module 2HX711 Module 1Buck ConverterAC_DimmerRelay_ModuleLCD_TFTKipas_KontrolCoolerJD_VCCArduino_Nano_v3.x

Pipernigrum iot bill of materials (BOM)

28 components, 21 distinct parts.

QtyPartRefs
1
ESP32-DEVKITC-32U
U1
1
DS18B20
U2
1
HTU21D
U3
1
PZEM-004t
U4
1
~
U5
1
Driver Stepper
U6
1
HX711 Module 4
U7
1
HX711 Module 3
U8
1
HX711 Module 2
U9
1
HX711 Module 1
U10
1
Buck Converter
U11
1
AC_Dimmer
U12
1
Relay_Module
U13
1
LCD_TFT
U14
1
Kipas_Kontrol
U15
1
Cooler
U16
1
JD_VCC
U17
1
Arduino_Nano_v3.x
A1
1
Fuse
F1
6
10K
R1, R2, R3, R4, R8, R9
Show 1 more
QtyPartRefs
3
1K
R5, R6, R7

Pipernigrum iot design files

The KiCad project lives in the naufalyafisusanto/pipernigrum-iot repository on GitHub; these links point at the commit this page was built from.

Pipernigrum iot: common questions

What microcontroller does the Pipernigrum iot use?

The Pipernigrum iot is built around the ESP32-DEVKITC-32U, from the ESP32 family.

How big is the Pipernigrum iot PCB?

The Pipernigrum iot measures 140.3 × 84.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pipernigrum iot?

28 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pipernigrum iot design files?

From the naufalyafisusanto/pipernigrum-iot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pipernigrum iot design in my own project?

The repository has no license, so all rights stay with naufalyafisusanto. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pipernigrum iot without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards