Esp32 bno085
nemonamo·esp32_bno085
About the Esp32 bno085 PCB
Esp32 bno085 is an open source ESP32 PCB design by nemonamo, published on GitHub. It is a 2-layer board measuring 24.5 × 53.4 mm, with 36 components from 23 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TP4056-42-ESOP8, BNO085 and XC6220B331MR-G. By type, the board carries 11 capacitors, 11 resistors, 4 ICs, 4 diodes, 2 connectors and 2 switches.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
ESP32 + BNO085 KiCad hardware design project
이 저장소는 BNO085 9축 스마트 IMU를 중심으로 한 소형 ESP32-S3 보드의 KiCad 설계 파일을 담고 있습니다. 회로도, PCB 레이아웃, 로컬 풋프린트 라이브러리, fabrication-toolkit 설정은 버전 관리하고, 생성된 Gerber와 분석 결과는 Git에 포함하지 않습니다.
- ESP32-S3 모듈 - Wi-Fi/BLE가 가능한 MCU 모듈 풋프린트. - BNO085 스마트 IMU - 가속도계, 자이로, 자력계, 센서 퓨전용 9축 센서. - USB-C 인터페이스 - USB 2.0 Type-C 리셉터클 기반 연결. - 로컬 풋프린트 포함 - BNO085와 Molex 커넥터 풋프린트를 저장소에 포함. - 제작 설정 버전 관리 - 반복 가능한 제조 파일 생성을 위한 fabrication-toolkit 설정 포함.
Main components on the Esp32 bno085
Esp32 bno085 bill of materials (BOM)
36 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056-42-ESOP8 TOPPOWER(Nanjing Extension Microelectronics) | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | BNO085 CEVA | IC_BNO085 | U3 |
| 1 | XC6220B331MR-G XC6220B331MR Torex Semicon | SOT-23-5 | U4 |
| 1 | AO3401A Alpha & Omega Semicon | SOT-23 | Q1 |
| 1 | 32.7680kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 530480210 Molex | MOLEX_530480210 | J1 |
| 1 | TYPE-C-31-M-12 USB_C_Receptacle_USB2.0_16P Korean Hroparts Elec | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | RESET | SW_SPST_B3U-1000P | SW1 |
| 1 | BOOT | SW_SPST_B3U-1000P | SW2 |
| 1 | BAT760-7 BAT760 DIODES | D_SOD-323 | D1 |
| 1 | Orange | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | Blue | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | LED_BLU | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 4 | 10uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4 |
| 5 | 0.1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C6, C7, C10, C11 |
| 2 | 22pF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C9 |
| 2 | 5.1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 1 | 100k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 1.2k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6 |
| 4 | 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R9, R10, R11 |
| 1 | 470 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
Esp32 bno085 design files
The KiCad project lives in the nemonamo/esp32_bno085 repository on GitHub; these links point at the commit this page was built from.
- Layoutesp32_bno085.kicad_pcb
- Schematicesp32_bno085.kicad_sch
Esp32 bno085: common questions
What microcontroller does the Esp32 bno085 use?
The Esp32 bno085 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Esp32 bno085 PCB?
The Esp32 bno085 measures 24.5 × 53.4 mm, has 2 copper layers and is 1.580794 mm thick.
How many components are on the Esp32 bno085?
36 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32 bno085 design files?
From the nemonamo/esp32_bno085 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32 bno085 design in my own project?
The repository has no license, so all rights stay with nemonamo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32 bno085 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k