CircuitPythonBadge
neubauek·CircuitPythonBadge·Kicad Files/CircuitPythonBadge v1_3/CircuitPythonBadge v1_3.kicad_pcb
About the CircuitPythonBadge PCB
CircuitPythonBadge is an open source Microchip SAM PCB design by neubauek, published on GitHub. It is a 2-layer board measuring 90 × 90 mm, with 62 components from 29 distinct parts.
Its main chip is the ATSAMD51J19A-AU, from the Microchip SAM family. Other key parts include the W25Q64JVSSIQ, AP2112K-3.3, LIS3DHTR, PAM8301 and SH1106_1.3. By type, the board carries 18 capacitors, 14 resistors, 12 LEDs, 6 ICs, 3 crystals and 2 transistors.
It belongs with the wearables and audio designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Open Source Hardware Circuit Python Badge
https://kevinneubauer.com/portfolio/circuitpython-badge/
Known Issue(s): V1.2: - The VDD pin on the PAM8301 chip is missing a 1 uF and a 10 uF decoupling capacitor. Without these, the speaker audio will randomly drop out. Fixed in v1.3.
Main components on the CircuitPythonBadge
CircuitPythonBadge bill of materials (BOM)
62 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD51J19A-AU | QFP50P1200X1200X120-64N | U1 |
| 1 | W25Q64JVSSIQ | SOIC8_208MIL | U2 |
| 1 | AP2112K-3.3 | Adafruit Metro M4 Express-SMARTPRJ_SOT23-DBV | U3 |
| 1 | LIS3DHTR | Adafruit Circuit Playground Express-MICROBUILDER_LGA16_3X3MM | U4 |
| 1 | PAM8301 | Adafruit Circuit Playground Express-MICROBUILDER_SOT23-6 | U5 |
| 1 | SH1106_1.3 | SH1106_1.3_I2C_128x64 | U6 |
| 2 | DMG341 | Adafruit Hallowing M0 Express-MICROBUILDER_SOT23-R | Q1, Q2 |
| 1 | 10118192-0001LF | 10118192-0001LF(MICRO-USB-B-AMPHENOL-FCI) | X2 |
| 1 | Badgelife_sao_connector_v169bis | Badgelife-SAOv169-BADGE-2x3 | X3 |
| 1 | FC-135 32.7680KA-A5 | Adafruit Metro M4 Express-ADAFRUIT2_XTAL3215 | Y1 |
| 1 | SWD_Pads | Pogo SWD | J23 |
| 1 | Battery | BatteryHolder_Keystone_2464_3xAA | BT1 |
| 1 | 5V-500mA | Adafruit Metro M4 Express-ADAFRUIT_R1206 | F1 |
| 1 | ST-025BT | BUZZER_SMT_7.5MM | SP1 |
| 1 | JS202011SCQN | Adafruit Hallowing M0 Express-MICROBUILDER_DPDT_SMT_JS202011SCQN | SW5 |
| 1 | RED | LED_0603_1608Metric | LED1 |
| 1 | GREEN | LED_0603_1608Metric | LED4 |
| 10 | SK6812 | SK6812_Mini | LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12 +2 |
| 1 | MBR120 | Adafruit Hallowing M0 Express-MICROBUILDER_SOD-123 | D1 |
| 1 | 10uH | Adafruit Metro M4 Express-MICROBUILDER_INDUCTOR_1007 | L1 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 13pF | C_0603_1608Metric | C1, C2 |
| 9 | 0.1uF | C_0603_1608Metric | C3, C4, C9, C10, C11, C12, C13, C17 +1 |
| 3 | 1uF | C_0603_1608Metric | C5, C7, C16 |
| 4 | 10uF | C_0603_1608Metric | C6, C8, C14, C15 |
| 7 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R8, R9, R14 |
| 1 | 330 | R_0603_1608Metric | R5 |
| 2 | 100K | R_0603_1608Metric | R6, R7 |
| 3 | 1K | R_0603_1608Metric | R10, R11, R12 |
| 1 | 47K | R_0603_1608Metric | R13 |
CircuitPythonBadge design files
The KiCad project lives in the neubauek/CircuitPythonBadge repository on GitHub; these links point at the commit this page was built from.
CircuitPythonBadge: common questions
What microcontroller does the CircuitPythonBadge use?
The CircuitPythonBadge is built around the ATSAMD51J19A-AU, from the Microchip SAM family.
How big is the CircuitPythonBadge PCB?
The CircuitPythonBadge measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CircuitPythonBadge?
62 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CircuitPythonBadge design files?
From the neubauek/CircuitPythonBadge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the CircuitPythonBadge design in my own project?
The repository has no license, so all rights stay with neubauek. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CircuitPythonBadge without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Earlier revisions in the repo: CircuitPythonBadge v1_2
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416