5 open source boards using the ATSAMD51J19A-AU
Real designs built with the ATSAMD51J19A-AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Mainboard
pycubed
90.2 × 95.9 mm196 parts2LNo license97Microchip SAM
Firefish
pimbongaerts
72.2 × 42.8 mm95 parts2LCustom license13Microchip SAM
CircuitPythonBadge
neubauek
90 × 90 mm62 parts2LNo license4Microchip SAM
Mainboard
alxklso
90.2 × 95.9 mm196 parts4LMIT1Microchip SAM
Mainboard
stanford-ssi
90.2 × 95.9 mm248 parts2LNo license0
How designs wire the ATSAMD51J19A-AU
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATSAMD51J19A-AU connects to, and the resistors, capacitors and other passives placed on it.
- The VDDANA pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The VDDIO_0 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The PB11/I11/SERCOM4.3/I2SFS pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- The PB12/I12/SERCOM4.0/I2SCK pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PA00/EINT0/SERCOM1.0pin 1 | Connected to: Signal 100% |
|
| PA01/EINT1/SERCOM1.1pin 2 | Connected to: Signal 100% |
|
| PA03/I3/VREFA/AIN1pin 4 | Connected to: 3.3V 100% | — |
| GND_0pin 7 | Connected to: GND 100% | — |
| VDDANApin 8 | Connected to: 3.3V 100% |
|
| PB08/I8/AIN2/SERCOM4.0pin 11 | Connected to: LTC4121 40% · not connected 20% |
|
| PB09/I9/AIN3/SERCOM4.1pin 12 | Connected to: Another IC 60% · not connected 20% |
|
| PA06/I6/VREFC/AIN6/SERCOpin 15 | Connected to: Signal 80% · not connected 20% |
|
| PA07/I7/AIN7/SERCOM0.3pin 16 | Connected to: Signal 60% · not connected 40% |
|
| VDDIO_0pin 21 | Connected to: 3.3V 100% |
|
| GND_1pin 22 | Connected to: GND 100% | — |
| PB11/I11/SERCOM4.3/I2SFSpin 24 | Connected to: MR25H40MDF 40% |
|
| PB12/I12/SERCOM4.0/I2SCKpin 25 | Connected to: Signal 100% |
|
| PB13/I13/SERCOM4.1/I2SMCpin 26 | Connected to: Signal 100% |
|
| PB15/I15/SERCOM4.3/PCC9pin 28 | Connected to: Signal 80% · not connected 20% |
|
| PA12/I12/I2C/SERCOM2.0+4pin 29 | Connected to: A connector 80%, another IC 40% |
|
| PA13/I13/I2C/SERCOM2.1+4pin 30 | Connected to: A connector 80%, another IC 40% |
|
| PA14/I14/SERCOM2+4.2pin 31 | Connected to: A connector 80%, another IC 40% · not connected 20% |
|
| PA15/I15/SERCOM2+4.3pin 32 | Connected to: Signal 60% · not connected 40% |
|
| GND_2pin 33 | Connected to: GND 100% | — |
| VDDIO_1pin 34 | Connected to: 3.3V 100% |
|
| PA18/I2/SERCOM1+3.2pin 37 | Connected to: VBUS_RESET 60% · not connected 20% · a signal 20% | — |
| PA23/I2C/I7/SERCOM3.1+5.pin 44 | Connected to: MAX706RESA 60%, a connector 40% |
|
| GND_3pin 47 | Connected to: GND 100% | — |
| VDDIO_2pin 48 | Connected to: 3.3V 100% |
|
| PA27/I11pin 51 | Connected to: A connector 60% · not connected 20% |
|
| RESETpin 52 | Connected to: A connector 80% |
|
| VDDCOREpin 53 | Connected to: Signal 100% |
|
| GND_4pin 54 | Connected to: GND 100% | — |
| VSWpin 55 | Connected to: Signal 80% · not connected 20% |
|
| VDDIO_3pin 56 | Connected to: 3.3V 100% |
|
| PA30/I14/SERCOM1.2/SWCLKpin 57 | Connected to: A connector 80% |
|
| PB30/I14/SERCOM5.1/SWOpin 59 | Connected to: RFM98PW 60% · not connected 20% |
|
| PB31/I15/SERCOM5.0pin 60 | Connected to: Signal 80% · not connected 20% |
|
| PB01/I1/AIN13/SERCOM5.3pin 62 | Connected to: Signal 100% |
|
| PB02/I2/AIN14/SERCOM5.0pin 63 | Connected to: Another IC 60%, a connector 40% |
|
| PB03/I3/AIN15/SERCOM5.1pin 64 | Connected to: Another IC 60%, a connector 40% |
|
27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by pycubed, Firefish by pimbongaerts, CircuitPythonBadge by neubauek and Mainboard by alxklso.
The ATSAMD51J19A-AU in open source designs
The gallery holds 5 open source boards using the ATSAMD51J19A-AU from 5 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 196 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Mainboard by pycubed.
Parts used alongside the ATSAMD51J19A-AU
Microcontrollers on boards using the ATSAMD51J19A-AU
What boards using the ATSAMD51J19A-AU are built for
ATSAMD51J19A-AU: common questions
Where can I find a ATSAMD51J19A-AU reference design?
Each of the 5 boards on this page is a real design using the ATSAMD51J19A-AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATSAMD51J19A-AU VDDANA pin?
The VDDANA pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ATSAMD51J19A-AU.
What decoupling capacitors do designs use on the ATSAMD51J19A-AU VDDIO_0 pin?
The VDDIO_0 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the ATSAMD51J19A-AU.
What pull-up resistor is used on the ATSAMD51J19A-AU PB11/I11/SERCOM4.3/I2SFS pin?
The PB11/I11/SERCOM4.3/I2SFS pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the ATSAMD51J19A-AU.
What parts are used alongside the ATSAMD51J19A-AU?
The ADM1176-1ARMZ-R7, BMX160, BQ25883RGER, MAX706RESA and RFM98PW appear in the most repositories here.
Which microcontrollers do boards using the ATSAMD51J19A-AU use?
Most are built on Microchip SAM (5).
How big is a typical board using the ATSAMD51J19A-AU?
The median is 90.2 × 95.9 mm, and 80% are two-layer designs.
What is the most popular open source board using the ATSAMD51J19A-AU?
By GitHub stars, Mainboard by pycubed, with 97 stars.
Can I simulate one of these boards using the ATSAMD51J19A-AU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.