Hub75 controller final

neusse·konnect-codex·test-projects/hub75-controller-final/hub75_controller_final.kicad_pcb

This repository ships a schematic but no board layout.

About the Hub75 controller final PCB

Hub75 controller final is an open source ESP32 PCB design by neusse, published on GitHub under the AGPL-3.0 license. It is a 2-layer board, with 27 components from 20 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP2112K and 74AHCT245. By type, the board carries 7 capacitors, 6 switches, 4 ICs, 4 resistors, 3 connectors and 2 diodes.

From the project

konnect-codex is a standalone Codex plugin for the Konnect server. It packages reviewed Codex-native skills, agents, hooks, and MCP configuration so Konnect behaves like a first-class Codex integration. It is deliberately separate from Konnect so each release can preserve a known

konnect-codex is a standalone Codex plugin for the Konnect server. It packages reviewed Codex-native skills, agents, hooks, and MCP configuration so Konnect behaves like a first-class Codex integration. It is deliberately separate from Konnect so each release can preserve a known-good Codex workflow without changing Konnect itself.

Release numbers identify the Konnect release reviewed by the plugin: konnect-codex v0.12.1 supports Konnect v0.12.1. A later -codex.N suffix identifies a companion-only revision for that unchanged upstream release. The exact reviewed upstream commit and guidance…

Main components on the Hub75 controller final

Hub75 controller final bill of materials (BOM)

27 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K
U1
1
ESP32-S3-WROOM-1
U2
2
74AHCT245
U3, U4
1
USB-C 16P
J1
1
HUB75 2x8
J2
1
5V PANEL
J3
1
3A PTC
F1
1
RESET
SW1
1
BOOT
SW2
1
UP
SW3
1
DOWN
SW4
1
SELECT
SW5
1
BACK
SW6
1
5V TVS
D1
1
USB ESD
D2
1
1000uF
C1
3
10uF
C2, C3, C5
3
100nF
C4, C6, C7
2
5.1k
R1, R2
2
10k
R3, R4

Hub75 controller final design files

The KiCad project lives in the neusse/konnect-codex repository on GitHub; these links point at the commit this page was built from.

Hub75 controller final: common questions

What microcontroller does the Hub75 controller final use?

The Hub75 controller final is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Hub75 controller final PCB?

The Hub75 controller final has 2 copper layers and is 1.6 mm thick.

How many components are on the Hub75 controller final?

27 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hub75 controller final design files?

From the neusse/konnect-codex repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hub75 controller final design in my own project?

Yes, under the terms of its AGPL-3.0 license, which neusse chose for the repository.

Can I test firmware for the Hub75 controller final without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in konnect-codex

Similar boards