10 open source boards using the AP2112K
Real designs built with the AP2112K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Bluey
electronut
59.2 × 40 mm72 parts2LCC-BY-4.096ESP32
Hornbill our
ExploreEmbedded
93 × 60 mm68 parts2LNo license27ESP32
Hornbill-ESP32-DEV
ExploreEmbedded
25.4 × 60.8 mm45 parts2LNo license27ESP32
Hornbill lights
ExploreEmbedded
93 × 60 mm47 parts2LNo license16NXP
Explore-M3-Hardware-Design-
ExploreEmbedded
25.5 × 62.1 mm63 parts2LNo license6Microchip SAM
ElectronutLabs-ZeroDriver
electronut
60 × 22.9 mm41 parts2LNo license5- schematic only · 27 partsESP32
Hub75 controller final
neusse27 parts2LAGPL-3.05 MiniMeter
DevKitty-io
10.2 × 10.2 mm18 parts2LNo license1AVR/Arduino
LumiGuard-Intelligent-Dual-UV-White-Control-System
IsmelArab
50 × 50 mm35 parts2LApache-2.00ESP32
PEBBLEC3
Computationgeek
28.6 × 49.8 mm21 parts2LNo license0
How designs wire the AP2112K
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the AP2112K connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 8 of 9 designs, most often 2.2 µF (then 100 µF).
- The EN pin is tied to 5V on 7 of 9 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 78% · a signal 22% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 78% · a signal 22% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 78% · a signal 22% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bluey by electronut, Hornbill-ESP32-DEV by ExploreEmbedded, Hornbill our by ExploreEmbedded and Hornbill lights by ExploreEmbedded.
The AP2112K in open source designs
The gallery holds 10 open source boards using the AP2112K from 10 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 43 components.
100% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is Bluey by electronut.
Parts used alongside the AP2112K
Microcontrollers on boards using the AP2112K
What boards using the AP2112K are built for
AP2112K: common questions
Where can I find a AP2112K reference design?
Each of the 10 boards on this page is a real design using the AP2112K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AP2112K VIN pin?
The VIN pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the AP2112K.
What decoupling capacitors do designs use on the AP2112K VOUT pin?
The VOUT pin has a decoupling capacitor on 8 of 9 designs, most often 2.2 µF (then 100 µF). Counted from the KiCad layouts of 9 open source designs using the AP2112K.
How is the AP2112K EN pin connected?
The EN pin is tied to 5V on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the AP2112K.
Which microcontrollers do boards using the AP2112K use?
Most are built on ESP32 (5), AVR/Arduino (1), Nordic nRF (1) and NXP (1).
How big is a typical board using the AP2112K?
The median is 50 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP2112K?
By GitHub stars, Bluey by electronut, with 96 stars.
Can I simulate one of these boards using the AP2112K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.