USB C PD PSU
niektb·sluisbrinkie-eurorack-published·Eurorack USB-C PD PSU/kicad/USB_C_PD_PSU.kicad_pcb
About the USB C PD PSU PCB
USB C PD PSU is an open source AVR/Arduino PCB design by niektb, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 24 × 100 mm, with 65 components from 34 distinct parts.
Its main chip is the ATMEGA32U4-M, from the AVR/Arduino family. Other key parts include the FUSB302BMPX, TMR-1212, L78M05ABDT and TPS26630RGE. By type, the board carries 23 capacitors, 23 resistors, 6 ICs, 4 jumpers, 4 diodes and 3 connectors.
It belongs with the audio designs in this gallery.
From the project
Published Modules of the Sluisbrinkie project
Library pre-requisite: https://github.com/kcl93/fusb302arduino This library needs a minor modification to select the correct I2C Address for the FUSB302. Line 76 from PDUFP.cpp needs to be changed to 0x24;
The boards have been tested and are fully functional but the software still has limited features (for example, current monitoring is indicated by a LED, meaning it's only a very rough indication).
Main components on the USB C PD PSU
USB C PD PSU bill of materials (BOM)
65 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FUSB302BMPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U1 |
| 1 | ATMEGA32U4-M ATmega32U4-M | QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U2 |
| 2 | TMR-1212 | Converter_DCDC_TRACO_TMR-xxxx_THT | U3, U4 |
| 1 | L78M05ABDT | TO-252-2 | U5 |
| 1 | TPS26630RGE | Texas_RGE0024H_VQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U6 |
| 1 | X322516MLB4SI | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Eurorack Power | IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | LL1009-2A, 2.54MM 2*3PIN HEADER,LENGTH=20MM Conn_02x03 Cixi Langlin | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 4 | Jumper_2_Open | JUMPER_SMD_1x2_tiny | JP1, JP2, JP3, JP4 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | SRV05-4 | SOT-23-6 | D1 |
| 2 | LED | LED_0603_1608Metric | D2, D4 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 4 | 1UF 1uF | C_0603_1608Metric | C1, C6, C16, C20 |
| 6 | 100NF 100nF | C_0603_1608Metric | C2, C3, C4, C5, C15, C19 |
| 1 | 100N 100n | C_0603_1608Metric | C7 |
| 3 | 1uF 50V | C_1206_3216Metric | C8, C9, C12 |
| 2 | 22UF 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11 |
| 2 | 330PF 330pF | C_0603_1608Metric | C13, C14 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 22uF 50V | C_1206_3216Metric | C17, C18, C21 |
| 2 | 12PF 12pF | C_0603_1608Metric | C22, C23 |
| 2 | 27R | R_0603_1608Metric | R1, R2 |
| 1 | 100K 100k | R_0603_1608Metric | R3 |
| 4 | 1k | R_0603_1608Metric | R4, R6, R12, R13 |
| 1 | 330R | R_0603_1608Metric | R5 |
| 6 | 10K 10k | R_0603_1608Metric | R7, R16, R17, R21, R22, R23 |
| 2 | 5K6 5k6 | R_0603_1608Metric | R8, R20 |
| 1 | 33K 33k | R_0603_1608Metric | R9 |
| 1 | 24K 24k | R_0603_1608Metric | R10 |
| 1 | 390K 390k | R_0603_1608Metric | R11 |
| 2 | 1k | R_1206_3216Metric | R14, R15 |
| 1 | 560K 560k | R_0603_1608Metric | R18 |
| 1 | 82K 82k | R_0603_1608Metric | R19 |
USB C PD PSU design files
The KiCad project lives in the niektb/sluisbrinkie-eurorack-published repository on GitHub; these links point at the commit this page was built from.
USB C PD PSU: common questions
What microcontroller does the USB C PD PSU use?
The USB C PD PSU is built around the ATMEGA32U4-M, from the AVR/Arduino family.
How big is the USB C PD PSU PCB?
The USB C PD PSU measures 24 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB C PD PSU?
65 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB C PD PSU design files?
From the niektb/sluisbrinkie-eurorack-published repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB C PD PSU design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which niektb chose for the repository.
Can I test firmware for the USB C PD PSU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in sluisbrinkie-eurorack-published
RP2040/RP2350
MMM main
niektb
40 × 110 mm145 parts4LCC-BY-SA-4.034!!UNTESTED!!
niektb
50.5 × 128.5 mm124 parts2LCC-BY-SA-4.034RP2040/RP2350
Toepler plus
niektb
20 × 106 mm112 parts2LCC-BY-SA-4.034Herford
niektb
40 × 110 mm109 parts2LCC-BY-SA-4.034Andes
niektb
40 × 110 mm109 parts2LCC-BY-SA-4.034RP2040/RP2350
PI SCOPE
niektb
40 × 110 mm97 parts2LCC-BY-SA-4.034Fv1 module
niektb
40 × 110 mm80 parts2LCC-BY-SA-4.034Divn
niektb
20 × 100 mm60 parts2LCC-BY-SA-4.034
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k